NEw shocks what do you guys think of these?

[jebiga41]

Shock Absorbers with PUR-bumper
PUR means Polyurethane. This material contains and additional capsule with a PUR "spring" on this specific shock absorber. This capsule carries up to 200kg and can be compressed by 70% and extends fully afterwards. It acts as an additional spring and end-bumper. No exchange of springs is needed ! When additional payload is installed just replace the ol shocks with trail master stage II - PUR shocks. Ready.
(Technical information: Use the PUR shocks only with additional payload).
from syncro services http://www.syncro-services.com/index_modi_eng.html" onclick="window.open(this.href);return false;

[Simon Baxter]

Those look like Iltis Auxilliary springs.
We're just getting set up with Trialmsater at the moment.

[syncropaddy]

Nothing new about this type of thing. Just like a bump stop but with a different rate Poly material and is used on many types of vehicles over the years. I spent many hours testing and rating systems like these on the estate versions of cars made by a certain manufacturer in the Midlands that isnt there anymore. Just make sure your shock mounts are up to the challenge of becoming a load bearing mount.