bulb holder rust

[Cyrus]

The bulb holders on my front indicators and rear lights are a bit rusty and I wish to remove so I have clean metal and a good contact.
My question is what can I put on the clean metal to prevent them rusting again and to keep good contact?
Cheers

[CovKid]

Not a lot you can do there to be honest. Replacing them may be only option.

[Cyrus]

The fronts are not a problem as I will replace with clear or smoked in the future, but I was hoping the rears would ave a solution as they can be expensive, I'll clean them up for MOT and keep a look out on fleabay.
Cheers anyway

[CovKid]

OK. Try emery cloth and spray with WD40 after. Should help.

[bumble bee]

you can get electralac i think its called at work its basically Lacquer that you can spray over wires and all things electrical thats what i use once ive cleaned earths and put them back on again i dont no what you can buy but heres an example
http://www.kpg-industrial.com/products/ ... cal_spray/
hope this helps