fiamma f35 pro fouling on gunzle westy roof brackets

[lloydy]

Loads of people seem to have this awning, anryone else have a problem with gunzles brackets hitting the fiamma awning? It's not by much, any one bent fiamma mounting bracket?

[ninja.turtle007]

Loads of people seem to have this awning, anryone else have a problem with gunzles brackets hitting the fiamma awning? It's not by much, any one bent fiamma mounting bracket?

On my Westy I have the same problem. Be careful you don't rip the canvas. I've not got round to having a look at it properly yet. But you could probably put a few washers as spacers to push it out slightly.

[ninja.turtle007]

Go on make me jealous, where are you??

[lloydy]

I'm on the beacons, lovely spot looking right down a valley. Beautiful views.
The awning is a right pain, when you lower the roof, gunzles brackets sit on the awning so you need someone to just push them in slightly to clear the awning. Spacers won't work because the top of the awning slots into the awning bracket. Looks like all you can do is bend the bracket?

[lloydy]

Go on make me jealous, where are you??

If your on Facebook look us up. Lloyd tulloch, I'm posting a pic most days of where we are staying

[lloydy]

No cured with a slight bend of roof gutters

[jed the spread]

Cut the bolt back

jed

[lloydy]

Wasn't just the bolt, gunzles brackets actually sat on the awning when roof was lowered.
A slight tweak of the gutter, and now it clears fine
On my way to the lakes now