It's all mostly Kolbenschmidt stuff, so to all intents and purposes it's OE, TRW valves are very good.
They've not had too much of it in stock so I have what they had at the moment but the remainder is on order.
this is what I hope to eventually have on the shelf, going to take a little while to build up to but it is something I am on with..
Description Brand Retail Inc. VAT
Big end bearings 0.00 std – T3 WBX [All] Kolbenschmidt 11.95
Big end bearings 0.25 u/s - T3 WBX [All] Kolbenschmidt 11.95
Big end bearings 0.50 u/s – T3 WBX [All] Kolbenschmidt 11.95
Big end bearings 0.75 u/s - T3 WBX [All] Kolbenschmidt 14.01
Big end bearings 1.00 u/s- T3 WBX [All] Kolbenschmidt 14.01
Camshaft bearing set – T3 WBX early single thrust [all] Kolbenschmidt 9.98
Camshaft bearing set – T3 WBX early single thrust .25 o/s [all] Kolbenschmidt 9.98
Camshaft bearing set – T3 WBX late double thrust [all] 0.00
Cylinder Head [Bare] - T3 WBX [All except DF/EY] AMC 277.29
Cylinder Head [Bare] - T3 WBX [All except DF/EY] Kolbenschmidt 300.32
Cylinder Head [Complete] - T3 WBX [All except DF/EY] AMC 322.35
Cylinder Head [Complete] - T3 WBX[All except DF/EY] Kolbenschmidt 339.12
Cylinder liner 94mm - T3 WBX [All] Kolbenschmidt 60.11
Main bearings 0.00 From 07-1985 [std] - T3 WBX [All] Kolbenschmidt 49.08
Main bearings 0.25 u/s From 07-1985 - T3 WBX [All] Kolbenschmidt 49.08
Main bearings 0.25 u/s From 07-1985, outside oversize 0.50 – T3 WBX [All] Kolbenschmidt 64.02
Main bearings 0.5 u/s From 07-1985 - T3 WBX [All] Kolbenschmidt 51.21
Main bearings 0.50 u/s From 07-1985, outside oversize 0.50 – T3 WBX [All] Kolbenschmidt 64.02
Main bearings 0.50 From 07-1985, outside oversize 0.50 – T3 WBX [All] Kolbenschmidt 64.02
Piston - T3 WBX 1.9l DG 0.50 oversize Kolbenschmidt 80.92
Piston - T3 WBX 2.1l DJ 0.25 oversize Kolbenschmidt 90.32
Piston - T3 WBX 2.1l DJ 0.50 oversize Kolbenschmidt 90.32
Piston - T3 WBX 2.1l [DJ] Kolbenschmidt 90.32
Piston – T3 WBX 1.9l [DG & SP] Kolbenschmidt 76.88
Piston – T3 WBX 2.1l [MV/SR/SS] Kolbenschmidt 0.00
Piston + Liner Kitset - T3 WBX 2.1l [DJ] Kolbenschmidt 149.46
Piston + Liner Kitset – T3 WBX 1.9l [DG] Kolbenschmidt 134.58
Piston ring set – T3 WBX 1.9l Kolbenschmidt 61.00
Piston ring set - T3 WBX 2.1l Kolbenschmidt 53.80
Piston ring set 1.00 - T3 WBX 2.1l Kolbenschmidt 53.80
Piston ring set 1.00 – T3 WBX 1.9l ~~ check ~~ Kolbenschmidt 61.00
Small end bearings - T3 WBX [All] Semi finished Kolbenschmidt 7.71
Thrust Washers From 07-1985 - T3 WBX [All] Kolbenschmidt 13.84
Valve - T3 WBX Exhaust [All except DF/EY] 9mm stem TRW 16.93
Valve - T3 WBX Inlet [All except DF/EY] 8mm stem TRW 10.51
Valve cotters – T3 WBX exhaust 9mm TRW 0.48
Valve cotters – T3 WBX inlet 8mm TRW 0.48
Valve guide – T3 WBX [exhaust] [4 per pack] TRW 5.85
Valve guide – T3 WBX [inlet] [4 per pack] TRW 5.60
Hope that's of some use to you lot, once I've built that up I'll get the diesel equivalents, but obviously they don't fail as often as the WBX does.....
