15mm lightweight ply supplier
Moderators: User administrators, Moderators
15mm lightweight ply supplier
Hi all,
Does anyone know where i can buy a couple of sheets of lightweight ply. I need 15mm oak veneered. It's really hard to buy.
Vohringer make it and Morland UK but i cannot find a supplier.
Any help greatly appreciated.
Doug
Does anyone know where i can buy a couple of sheets of lightweight ply. I need 15mm oak veneered. It's really hard to buy.
Vohringer make it and Morland UK but i cannot find a supplier.
Any help greatly appreciated.
Doug
- Ian Hulley
- Registered user
- Posts: 12661
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: 15mm lightweight ply supplier
Autocraft Motorcaravans Staveley, near Chesterfield, just off M1 J29A 

The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
Re: 15mm lightweight ply supplier
Thanks Ian,
I'll give them a ring and see if they deliver to Cornwall.
Cheers
Doug
I'll give them a ring and see if they deliver to Cornwall.
Cheers
Doug
- Ian Hulley
- Registered user
- Posts: 12661
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: 15mm lightweight ply supplier
There's another place near Bristol as well ... I'm 99% sure they won't want to deliver to that far-flung part of the empire
Ian

Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
Re: 15mm lightweight ply supplier
I thought Cornwall was right in the centre of the empire? 

-
- Registered user
- Posts: 128
- Joined: 24 Oct 2006, 09:53
- 80-90 Mem No: 3332
- Location: Liverpool/North Wales
Re: 15mm lightweight ply supplier
I bought some directly from morland uk a few weeks ago, it was not cheap but is nice and lightweight.
Think it was about 110 a sheet
They will deliever but it will cost you £60 and need to order a min of 2 sheets
Got some pics of mine (oak)if you are interested
Think it was about 110 a sheet
They will deliever but it will cost you £60 and need to order a min of 2 sheets
Got some pics of mine (oak)if you are interested
Re: 15mm lightweight ply supplier
Excellent , Thanks Matt.
Did you just phone them direct using the number on the website? The oak veneer is the stuff I am after.
Would be interested to see some pics... Is it good stuff?
Did you just phone them direct using the number on the website? The oak veneer is the stuff I am after.
Would be interested to see some pics... Is it good stuff?
-
- Registered user
- Posts: 128
- Joined: 24 Oct 2006, 09:53
- 80-90 Mem No: 3332
- Location: Liverpool/North Wales
Re: 15mm lightweight ply supplier
Hi Mate
Yeah just phoned them direct on the number on the website
I think the wood is great although don't have any experience with other lightweight alternatives
Here is a link to flickr where I have uploaded a few pics.
http://www.flickr.com/photos/mattcripps/
Not the best quality pics but they were taken on my phone.
Hope this helps, let me know if you need any more info
Yeah just phoned them direct on the number on the website
I think the wood is great although don't have any experience with other lightweight alternatives
Here is a link to flickr where I have uploaded a few pics.
http://www.flickr.com/photos/mattcripps/
Not the best quality pics but they were taken on my phone.
Hope this helps, let me know if you need any more info
- the_mitchells
- Registered user
- Posts: 29
- Joined: 07 Mar 2011, 20:46
- 80-90 Mem No: 9338
- Location: Hull, UK
Re: 15mm lightweight ply supplier
christ!!! is it really that expensive??? was going to re-do the interior but i tink it might be very expensive 

1988 1.9 auto AKA Mally!
Re: 15mm lightweight ply supplier
Is it a rewal wood veneer finish or is there some kind of laquer or vinyl on top?
Looks like really good stuff. - expensive but good worthwhile.
IS two sheets enough for all doors etc?
Looks like really good stuff. - expensive but good worthwhile.
IS two sheets enough for all doors etc?