Afternoon wiseones
Just got back from camperjam and have developed a leak from the oil cooler. Haynes seems to only cover refit after engine dismantle,
Does anyone happen to have a idiots guide on replacing them and what gaskets are need, CU 2.0 engine.
Thanks
SPence
Oil Cooler
Moderators: User administrators, Moderators
-
dugcati
- Registered user
- Posts: 2004
- Joined: 15 Aug 2007, 18:23
- 80-90 Mem No: 3825
- Location: Debris
- Contact:
Re: Oil Cooler
few simple steps in brief...
* Engine out (or lowered down with gearbox attached still)
* Alternator and fan housing off
* Undue 3 bolts to removed oil cooler.
* Put on new cooler with new seals.
* Refit fan and alternator.
* Refit engine/lift up and bolt rear bar back into place
***** Are you sure its the oil cooler? as on my bus it was the oil filter housing which was split - to get that off follow the above as you need to remove the oil cooler to access one of the bolts for the oil filter housing
Doug
* Engine out (or lowered down with gearbox attached still)
* Alternator and fan housing off
* Undue 3 bolts to removed oil cooler.
* Put on new cooler with new seals.
* Refit fan and alternator.
* Refit engine/lift up and bolt rear bar back into place
***** Are you sure its the oil cooler? as on my bus it was the oil filter housing which was split - to get that off follow the above as you need to remove the oil cooler to access one of the bolts for the oil filter housing
Doug
It is by will alone that I set my 'van' in motion!