Watercooled Cooling Systems....

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

User avatar
bertnuggit
Registered user
Posts: 28
Joined: 11 Sep 2010, 23:50
80-90 Mem No: 8920
Location: Sowerby Bridge, Yorkshire...

Re: Watercooled Cooling Systems....

Post by bertnuggit »

Glad you're there to steer me in the right direction Ian!!!!! :oops:
Red VW T25, 1985(B), DG Engine, 5 Speed, Petrol.

User avatar
Ian Hulley
Registered user
Posts: 12661
Joined: 11 Oct 2005, 08:08
80-90 Mem No: 1323
Location: Wirksworth, Derbyshire ... or at t'mill

Re: Watercooled Cooling Systems....

Post by Ian Hulley »

It should (MUST) be fitted down inside the chassis channels and nowhere near the engine :wink:

Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure

User avatar
kevtherev
Registered user
Posts: 18832
Joined: 23 Oct 2005, 20:13
80-90 Mem No: 2264
Location: Country estate Wolverhampton Actually

Re: Watercooled Cooling Systems....

Post by kevtherev »

is there anywhere else?
I can't think of any tow bar that doesn't use the rails

I suppose if the tow bar is low enough it would need the van lifting a little higher to pull the engine out from under the van unless the skate board is a low rider :D
AGG 2.0L 8V. (Golf GTi MkIII)

User avatar
Ian Hulley
Registered user
Posts: 12661
Joined: 11 Oct 2005, 08:08
80-90 Mem No: 1323
Location: Wirksworth, Derbyshire ... or at t'mill

Re: Watercooled Cooling Systems....

Post by Ian Hulley »

kevtherev wrote: I suppose if the tow bar is low enough it would need the van lifting a little higher to pull the engine out from under the van unless the skate board is a low rider :D

Or old car crawler or lifting sling :wink:
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure

Locked