input shaft removal

[CraigSagar]

I am trying to remove the gearbox input shaft on a 5 speed diesel gear box, to have the end repaired I have removed the bell housing and a small circlip at the bottom of the shaft, but not sure what else needs to be done to remove the shaft

[futbus]

Move the circlip up the shaft, then the collar underneath needs to be pulled up off the splines so the shaft can be un threaded. Your almost there with what you have done.

[CraigSagar]

Thanks very much, I got it out in 2 seconds once I knew what to do, thanks again
craig