rubber sealant

Thin bits of metal and bright blue light.

Moderators: User administrators, Moderators

Locked
User avatar
jpee
Registered user
Posts: 759
Joined: 30 Mar 2008, 17:37
80-90 Mem No: 5037
Location: falkirk

rubber sealant

Post by jpee »

Hi All

Does anyone know of a good rubber sealant. Not to prevent windows leaking, but to apply to the rubber itself to stop black streaks running down the van after washing. I will eventually get round to replacing the rubbers but need a short term fix. Every time i wash van or it rains heavy, I get black streaks down the side of the van from the wondow rubbers.

Cheers
Never sure where I'm going till i get there.

Novice in need
Registered user
Posts: 87
Joined: 26 Nov 2010, 11:22
80-90 Mem No: 9010
Location: Bedfordshire

Re: rubber sealant

Post by Novice in need »

The only thing i have heard on here about how to temporarily stop this is to apply a thin coat of clear mastic... suggested on paint your wagon post. Hope that helps :ok
I have a 1.9 DG Petrol Watercooled Panel Van 1990 ... that im starting to believe has issues!!!!

User avatar
1664
Registered user
Posts: 8746
Joined: 30 Mar 2006, 15:20
80-90 Mem No: 3299
Location: Coventry Member

Re: rubber sealant

Post by 1664 »

don't be too sure it's the fault of your window rubbers. I had exactly the same thing happening and a couple of years ago I took the windows out when the van was being resprayed. New rubbers back in and exactly the same thing happens - it might not be the van, it's probably the cr@p the rain brings down with it
Vorsprung Durch Technik my ar$e!

User avatar
jpee
Registered user
Posts: 759
Joined: 30 Mar 2008, 17:37
80-90 Mem No: 5037
Location: falkirk

Re: rubber sealant

Post by jpee »

Definitely the rubbers. Cloth turns black when wiped over them. Will cive the mastic a go.

Cheers
Never sure where I'm going till i get there.

NicBeeee
Registered user
Posts: 633
Joined: 12 Aug 2010, 06:57
80-90 Mem No: 8608
Location: Fairly close to Hinckley

Re: rubber sealant

Post by NicBeeee »

Hi

I use Ambersil greasil 4000 on all my rubbers, including gaitiors, door seals and coolant pipes. Keeps them lasting longer and waterproofs the door seals. It is used in the aviation idustry so if it good enough at 20,000 ft then it must be good enough for the M1. It is also meant to waterproof electrical systems (However I have never tried it but I keep meaning to coat on old circuit board and dunc it in a cup of water and see what happens).

I am no expert but I thought if you can put a waterproof coating on the rubber it might stop it from running. Sounds like somebody has put something on the rubber to make it look better, drop of thinners before applying the greasil might do the trick.
“A sure cure for seasickness is to sit under a tree.” ― Spike Milligan

1988 1.9 DG

User avatar
Oldiebut goodie
Registered user
Posts: 7482
Joined: 18 Apr 2008, 01:19
80-90 Mem No: 11135
Location: Eastern Angle

Re: rubber sealant

Post by Oldiebut goodie »

You could try the old standby - black shoe polish - don't laugh it does work!
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶

Locked