560 miles later , horsham to devon , devon to eden project and back ,then home ... poor little 1.6D did not miss a beat ..quite a few first gear hills !! but we lived with it.
should go up hills better with SVX engine , (now need to sort collection )
power steering worked a treat over the weekend. got a small list of todo's after sleeping in it for 3 nights with family of 4. but very impressed on how it worked out.
knackerd now , bit of ebay . bit of beer and bed i think
Matt
Rusty Westy - My Diary
Moderators: User administrators, Moderators
-
16vmini
- Registered user
- Posts: 436
- Joined: 17 Jul 2008, 13:41
- 80-90 Mem No: 9014
- Location: Near Gatwick
- Contact:
Re: Rusty Westy
Rusty Westy : http://www.teamorchard.co.uk" onclick="window.open(this.href);return false; / http://www.16vmini.co.uk" onclick="window.open(this.href);return false;
-
16vmini
- Registered user
- Posts: 436
- Joined: 17 Jul 2008, 13:41
- 80-90 Mem No: 9014
- Location: Near Gatwick
- Contact:
Re: Rusty Westy
collected my SVX :
the new engine for my westy :
should blow the rust off it
the new engine for my westy :
should blow the rust off it
Rusty Westy : http://www.teamorchard.co.uk" onclick="window.open(this.href);return false; / http://www.16vmini.co.uk" onclick="window.open(this.href);return false;
-
16vmini
- Registered user
- Posts: 436
- Joined: 17 Jul 2008, 13:41
- 80-90 Mem No: 9014
- Location: Near Gatwick
- Contact:
Re: Rusty Westy
svx engine out , wiring loom next
MOT due next month , just spent 300 quid at brickwerks getting all new track rod ends , ARB bushes , top and bottom ball joints as well.
All need doing for the MOT !
lucky my MOT friend owes me , so hes fitting it all for nothing before the MOT
still planning the SVX conversion , would like to do it last week of april .. but we shall see if i can get all parts by then
Matt
MOT due next month , just spent 300 quid at brickwerks getting all new track rod ends , ARB bushes , top and bottom ball joints as well.
All need doing for the MOT !
lucky my MOT friend owes me , so hes fitting it all for nothing before the MOT
still planning the SVX conversion , would like to do it last week of april .. but we shall see if i can get all parts by then
Matt
Rusty Westy : http://www.teamorchard.co.uk" onclick="window.open(this.href);return false; / http://www.16vmini.co.uk" onclick="window.open(this.href);return false;
-
16vmini
- Registered user
- Posts: 436
- Joined: 17 Jul 2008, 13:41
- 80-90 Mem No: 9014
- Location: Near Gatwick
- Contact:
Re: Rusty Westy
wow time flys , and nothing much gets done.
still not fully stripped the SVX loom !
MOT getting closer , and some welding WILL need to be done for the MOT.
my friend that does MOT's picked up on a few joints / bushes that needed replacing for MOT.
my 2nd had LHD powersteering rack , was not such a good buy , my friend said the track rods where worn ,so ordered a new set from brickwerks
he nicely fitted them for me saturday , allong with top suspension joints , and new poly bush roll bar bushes.
must get welding done this week , at least the parts needed for the MOT.
Matt
still not fully stripped the SVX loom !
MOT getting closer , and some welding WILL need to be done for the MOT.
my friend that does MOT's picked up on a few joints / bushes that needed replacing for MOT.
my 2nd had LHD powersteering rack , was not such a good buy , my friend said the track rods where worn ,so ordered a new set from brickwerks
he nicely fitted them for me saturday , allong with top suspension joints , and new poly bush roll bar bushes.
must get welding done this week , at least the parts needed for the MOT.
Matt
Rusty Westy : http://www.teamorchard.co.uk" onclick="window.open(this.href);return false; / http://www.16vmini.co.uk" onclick="window.open(this.href);return false;
-
16vmini
- Registered user
- Posts: 436
- Joined: 17 Jul 2008, 13:41
- 80-90 Mem No: 9014
- Location: Near Gatwick
- Contact:
Re: Rusty Westy
got some welding done at last... MOT getting closer.
front arch / b post needed fixing (drivers LHD )
started cutting out rot, will have to do side sill at somepoint , it has been done in the past but not well ( saw when i had fridge out )
roughly cut off arch , as that needed semi replacing...
forgot to take photos , but filled in internal holes , then tacked B post repair panel on :
had to repair side panel as well , edge had completly gone ! , not the best job , but will see me out for awhile :
again not enough photos , filled in the panel that creates the inner wing,
trial fit of wing ,
fully welded wing , and slapped some primer on ,
sealed all underside , and stone chipped. will do for a few years
not happy with B post panel , should have spent more time on it , its not long enough ! , but will re-do when i do outer sill
(will lengthen other side when i come to do that ... )
front arch / b post needed fixing (drivers LHD )
started cutting out rot, will have to do side sill at somepoint , it has been done in the past but not well ( saw when i had fridge out )
roughly cut off arch , as that needed semi replacing...
forgot to take photos , but filled in internal holes , then tacked B post repair panel on :
had to repair side panel as well , edge had completly gone ! , not the best job , but will see me out for awhile :
again not enough photos , filled in the panel that creates the inner wing,
trial fit of wing ,
fully welded wing , and slapped some primer on ,
sealed all underside , and stone chipped. will do for a few years
not happy with B post panel , should have spent more time on it , its not long enough ! , but will re-do when i do outer sill
(will lengthen other side when i come to do that ... )
Rusty Westy : http://www.teamorchard.co.uk" onclick="window.open(this.href);return false; / http://www.16vmini.co.uk" onclick="window.open(this.href);return false;
-
Brendon
- Registered user
- Posts: 21
- Joined: 25 Sep 2009, 21:16
- 80-90 Mem No: 7465
- Location: Horsham ,West Sussex
Re: Rusty Westy
I've been watching this thread for a while now as I'm just starting to go through the same motions.
But welding wise I'm having to wait for a friend to finish his mini first ( only 6 weeks behind what I had planned).
So painfull having to wait for other people.
Any how it's looking good but just wondering where your getting you panels from us it heritage?
Ps see your van most days as I live around the corner I should pop around and say hello maybe?
Keep up the good work
But welding wise I'm having to wait for a friend to finish his mini first ( only 6 weeks behind what I had planned).
So painfull having to wait for other people.
Any how it's looking good but just wondering where your getting you panels from us it heritage?
Ps see your van most days as I live around the corner I should pop around and say hello maybe?
Keep up the good work
-
16vmini
- Registered user
- Posts: 436
- Joined: 17 Jul 2008, 13:41
- 80-90 Mem No: 9014
- Location: Near Gatwick
- Contact:
Re: Rusty Westy
Brendon wrote:I've been watching this thread for a while now as I'm just starting to go through the same motions.
But welding wise I'm having to wait for a friend to finish his mini first ( only 6 weeks behind what I had planned).
So painfull having to wait for other people.
Any how it's looking good but just wondering where your getting you panels from us it heritage?
Ps see your van most days as I live around the corner I should pop around and say hello maybe?
Keep up the good work
yes , i have a friend at heritage , apart from these b post panels being to short , there panels are good enough for the price .
yea pop over . and i am happy to help with your welding etc if i have time ...
Matt
Rusty Westy : http://www.teamorchard.co.uk" onclick="window.open(this.href);return false; / http://www.16vmini.co.uk" onclick="window.open(this.href);return false;
-
Brendon
- Registered user
- Posts: 21
- Joined: 25 Sep 2009, 21:16
- 80-90 Mem No: 7465
- Location: Horsham ,West Sussex
Re: Rusty Westy
Cheers Matt your a gent.
Do you find its better to replace the whole panel rather than patching cause i have a few spots here and there and wonder if it justifies a full panel.
Do you find its better to replace the whole panel rather than patching cause i have a few spots here and there and wonder if it justifies a full panel.
-
16vmini
- Registered user
- Posts: 436
- Joined: 17 Jul 2008, 13:41
- 80-90 Mem No: 9014
- Location: Near Gatwick
- Contact:
Re: Rusty Westy
Brendon wrote:Cheers Matt your a gent.
Do you find its better to replace the whole panel rather than patching cause i have a few spots here and there and wonder if it justifies a full panel.
i say its like an iceberg , the bit of rust you see is only 10% of it , 90% more rust behind .
i am around sunday afternoon playing on mine ( i hope ) pop round and show us.
it all depends what you want
Matt
Rusty Westy : http://www.teamorchard.co.uk" onclick="window.open(this.href);return false; / http://www.16vmini.co.uk" onclick="window.open(this.href);return false;
-
16vmini
- Registered user
- Posts: 436
- Joined: 17 Jul 2008, 13:41
- 80-90 Mem No: 9014
- Location: Near Gatwick
- Contact:
Re: Rusty Westy
SVX loom now out ! :
just waiting for list of parts and pricing from rjes before placing the order.
today i got the whole day (thanks wife ) to work on other side arch / b post / filler cap area
started to cut rot out :
as allways , its worse behind :
had to extend the VW heritiage B post panel , as its a little short ...
panel tacked in , had to make a new panel above as well , as the VW panel is only the bottom part of the b - post
not the nicest , but he is me extended the panel :
then started repairing the inner wing
once all that was welded in , the wing could go on , and a slap of paint.
B post is not the best , as it had a load of filler in , so will need some more when the re-spray comes around...
but for now , thats good enough for MOT ... i might not win any awards
thats it for now ...
just waiting for list of parts and pricing from rjes before placing the order.
today i got the whole day (thanks wife ) to work on other side arch / b post / filler cap area
started to cut rot out :
as allways , its worse behind :
had to extend the VW heritiage B post panel , as its a little short ...
panel tacked in , had to make a new panel above as well , as the VW panel is only the bottom part of the b - post
not the nicest , but he is me extended the panel :
then started repairing the inner wing
once all that was welded in , the wing could go on , and a slap of paint.
B post is not the best , as it had a load of filler in , so will need some more when the re-spray comes around...
but for now , thats good enough for MOT ... i might not win any awards
thats it for now ...
Rusty Westy : http://www.teamorchard.co.uk" onclick="window.open(this.href);return false; / http://www.16vmini.co.uk" onclick="window.open(this.href);return false;
-
16vmini
- Registered user
- Posts: 436
- Joined: 17 Jul 2008, 13:41
- 80-90 Mem No: 9014
- Location: Near Gatwick
- Contact:
Re: Rusty Westy
in for its MOT today ... fingers crossed
Rusty Westy : http://www.teamorchard.co.uk" onclick="window.open(this.href);return false; / http://www.16vmini.co.uk" onclick="window.open(this.href);return false;
-
Plasticman
- Trader
- Posts: 8076
- Joined: 12 Oct 2005, 20:55
- 80-90 Mem No: 1948
- Location: lincolnshire
Re: Rusty Westy
Sod the awards, the bugger is drivable and thats it
mike
mike
-
lloydy
- Registered user
- Posts: 8015
- Joined: 24 Nov 2009, 17:54
- 80-90 Mem No: 5262
- Location: cheam surrey
Re: Rusty Westy
Massive improvement from when it was sat on my drive good work
good workTime is a drug. Too much of it kills you
-
16vmini
- Registered user
- Posts: 436
- Joined: 17 Jul 2008, 13:41
- 80-90 Mem No: 9014
- Location: Near Gatwick
- Contact:
Re: Rusty Westy
lloydy wrote:Massive improvement from when it was sat on my drive
still lots more to do , sliding door needs replacing i think , tail gate , and other rear wing ....
lol
Matt
Rusty Westy : http://www.teamorchard.co.uk" onclick="window.open(this.href);return false; / http://www.16vmini.co.uk" onclick="window.open(this.href);return false;
-
16vmini
- Registered user
- Posts: 436
- Joined: 17 Jul 2008, 13:41
- 80-90 Mem No: 9014
- Location: Near Gatwick
- Contact:
Re: Rusty Westy
12 months MOT !!!
now time to give it a wash , and load it up for our 6 hour trip to Yorkshire tomorrow !
Matt
now time to give it a wash , and load it up for our 6 hour trip to Yorkshire tomorrow !
Matt
Rusty Westy : http://www.teamorchard.co.uk" onclick="window.open(this.href);return false; / http://www.16vmini.co.uk" onclick="window.open(this.href);return false;