water leak - need to replace part

[ermie571]

Good morning good 80-90 folk!

Right, i have a 2.1 carbed, later water system grafted onto an early system. Its a bit of a hash....and after about 7 years, the hash has given up and sprung a leak:

http://www.facebook.com/album.php?aid=2 ... 0c1ec0ce46

right...tightening up the jubilee clip isn't working. What I need to know is what **should** go here....or is it somewhere where the two systems have been grafted together? So, it joins the ring pipe around the top, and the water from the manifold that goes across the engine...and a front to back water pipe by the looks of it.

Any ideas?

Em
xx

[Cruz]

I'd love to help (as I have an early system) but I can't access facebook at work and not everyone is on facebook

Does anything here look familiar?

http://www.bus-boys.com/bb121wb2.htm

or

[kevtherev]

Both late systems Emm

[ermie571]

Cruz/Kev thanks for coming back.
Going camping in an hour! (In the other van!!!) So will have a good look when I get home.

Cruz...didn't realise limitations of FB will host them properly sunday afternoon

Kev - just enlarged that parts diagram.....doesn't seem to relate to mine much.....but will pring out and look again after the weekend

Thanks again

Em
x