Speakers in doors

[tabbytiger23]

hello

Just looking for a bit of help, i bought some new speakers for my camper for in the doors very excited!
they was advertised as 6" but have come and there 6.5" across the face, i only need a 6" hole so this is probably where the 6" came from.
Now, the speakers i have in are 6" across the face which im thinking might mean the hole behined is small.

so the question is, if i have to make the whole bigger, whats the best way?

[whitevan woman]

You may be pleasantly surprised when you remove the existing ones! If not, I would remove the door cards (prise them off gently, dont want to break the fixings) then you can quite happily make the hole a wee bit bigger. Good luck.

[tabbytiger23]

You may be pleasantly surprised when you remove the existing ones! If not, I would remove the door cards (prise them off gently, dont want to break the fixings) then you can quite happily make the hole a wee bit bigger. Good luck.

i really hope i am pleasantly surprised! i will let you know after the weekend

[Ralf85]

[ If not, I would remove the door cards (prise them off gently, dont want to break the fixings) then you can quite happily make the hole a wee bit bigger. Good luck.[/quote]

And that's when you discover how rusty those doors really are!!!

Patrick

[tabbytiger23]

[ If not, I would remove the door cards (prise them off gently, dont want to break the fixings) then you can quite happily make the hole a wee bit bigger. Good luck.

And that's when you discover how rusty those doors really are!!!

Patrick[/quote]


oh no patrick dont say that!

[Ralf85]

I hope that yours are fine. Good luck.


Patrick

[2020mad]

Dont forget to check clearence of metal checkstraps or you may fit your speakers and close door and put straight through cones, i have had to remove mine to get in some 6x9's in and put webbing straps instead.

[tabbytiger23]

Dont forget to check clearence of metal checkstraps or you may fit your speakers and close door and put straight through cones, i have had to remove mine to get in some 6x9's in and put webbing straps instead.

i tried to fit them this afternoon and there is a metal bar across so they wont fit, im just going to return them and get some 13cm as these are what ive taken out

[2020mad]

Dont forget to check clearence of metal checkstraps or you may fit your speakers and close door and put straight through cones, i have had to remove mine to get in some 6x9's in and put webbing straps instead.

i tried to fit them this afternoon and there is a metal bar across so they wont fit, im just going to return them and get some 13cm as these are what ive taken out

get out the grinder, place a template in card on panel and dust with aerosol paint, remove and then you can see how much needs removing, then decide from there.

[tabbytiger23]

Dont forget to check clearence of metal checkstraps or you may fit your speakers and close door and put straight through cones, i have had to remove mine to get in some 6x9's in and put webbing straps instead.

i tried to fit them this afternoon and there is a metal bar across so they wont fit, im just going to return them and get some 13cm as these are what ive taken out

get out the grinder, place a template in card on panel and dust with aerosol paint, remove and then you can see how much needs removing, then decide from there.

NOOOO, no grinding! i have bought the same size speakers and fitted them weekend just gone, very pleased with the result!

thank you everyone for your help

White van women..... i would have been pleaseantly surprised if that bar across was not there they would have fit! never mind, im more than happy with the replacment and fortunatly i can return the ones that are bigger.

all is good

[tabbytiger23]

I hope that yours are fine. Good luck.


Patrick

No rust Patrik