cylinder head removal guide
Moderators: User administrators, Moderators
-
weston_masive
- Registered user
- Posts: 20
- Joined: 22 Apr 2010, 19:23
cylinder head removal guide
hi is there one for my 1981 t25 2.0l air cooled?
-
weston_masive
- Registered user
- Posts: 20
- Joined: 22 Apr 2010, 19:23
Re: cylinder head removal guide
yeah but i was looking for a guid with a bit more detail maybe some helpfull hints and tips ect also can it be done with the engine in situ or is it best to remove? thanks for any positive comments
-
marcus_asparagus
- Registered user
- Posts: 59
- Joined: 28 Feb 2007, 17:49
- 80-90 Mem No: 2884
- Location: Carmarthen, West Wales
Re: cylinder head removal guide
Hi there,
You could easily loose a day reading this guys website!
All your answers are in here........
http://www.benplace.com/vw2.htm
Happy reading!
Mark.
You could easily loose a day reading this guys website!
All your answers are in here........
http://www.benplace.com/vw2.htm
Happy reading!
Mark.
If passing pop in kettle always on!
Member No.2884
1.9DG Kamper fitted with Dellorto 40's!
Wife's T5 174 axe Caravelle.
Member No.2884
1.9DG Kamper fitted with Dellorto 40's!
Wife's T5 174 axe Caravelle.
-
orangebooboobearcrew
- Registered user
- Posts: 142
- Joined: 20 Jan 2008, 14:58
- 80-90 Mem No: 3718
- Location: Tamworth, Staffs
Re: cylinder head removal guide
Hi,
Did mine from the Haynes (CU 2.0l air cooled) and it was plenty self explanatory - not particularly difficult tbh. The hard bit was getting the engine in and out of the van...
Chris
Did mine from the Haynes (CU 2.0l air cooled) and it was plenty self explanatory - not particularly difficult tbh. The hard bit was getting the engine in and out of the van...
Chris