Starter motor bush

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Cherryboo
Registered user
Posts: 4
Joined: 18 Jun 2010, 00:05
80-90 Mem No: 0
Location: Worcestershire

Re: Starter motor bush

Post by Cherryboo »

BOXY wrote:Does your starter look like this?

http://shop.vw-bus.com/images/product_i ... s/34-1.jpg

If it does the bush is inside the silver supporting frame section on the left. The only way for the bush to get lost would be if the motor was completely dis-assembled.
Yes its like this one and the bush is missing!!! Its started making a really bad sound and found te bush was missing.
The starter on my van, 2 ltr Aircooled, doesn't have the supporting frame around the end of the shaft so it uses a bush and the engine casing to support the shaft. Like this one:-

http://shop.vw-bus.com/images/product_i ... /231-1.jpg

You're not trying to get a bush to fit the outside end of the shaft on the supporting frame type of starter are you?

User avatar
BOXY
Registered user
Posts: 1101
Joined: 21 Feb 2009, 15:37
80-90 Mem No: 8826
Location: Sunny SouthWest

Re: Starter motor bush

Post by BOXY »

Find your local starter motor refurbisher - they will be able to source one for you. You won't find one off the shelf as they aren't a normal service item. There isn't a bush in the bell housing.

I think this suggestion is your only option. If the bush has gone AWOL from that type of motor it's probably worth getting a professional to check out the motor to make sure the shaft, commutator ring and brushes are all still serviceable.
2ltr Aircooled CU with twin Solex's & originally a 009 dizzie, but now back to standard.

Locked