accelerator linkage on Aircooled engine

[elmo makaroy]

how do i go about replacing the accelerator linkage on my Aircooled 2.0 cu engine?

basically i need all the parts from the accelerator pedal to the carb linkage, i believe it has solex carbs, does anybody know were can i get theese parts?

many thanks for your help, i am slowly but surely getting somewere

[billy739]

i couldnt say without seeing the stuff.

frankly from experience , first of all everything wants tightening up and adjusting, after that a welder , some drills and grinding can sort most problems out.

what is your actuall problem? usually its carb inbalance and /or throttle travel or stiffness

[elmo makaroy]

main problem is wobbly rattly throttle linkage that makes it difficult to balance carbs and doesnt let me hit full throttle,

[billy739]

apart from in the end of the main tube across the engine there is a nylon socket with a spring behind , this can dissapear, everything else should tighten up.
usually the whole choke units on the carbs move , this is the securing screws loose.

[jason k]

cb one totally different to stock one. god second hand only way forward i think.

oh just a thought is the spring loaded cup still in the end of the throttle linkage bar?

this is there to damp out vibrations