Any advice or, step by step instructions massively appreciated.
Owned my van 5 years & always been full of praise for it so now a failure was due I guess....
Can't bear to let it go, cost £300 to buy but it's well loved by me & my family and @ 170,000miles it needs a little love mechanically too
thanks for reading
Mat
Q.? How to replace 1.6td jx Head Gasket ??
Moderators: User administrators, Moderators
-
matvanslam
- Registered user
- Posts: 0
- Joined: 06 May 2009, 16:54
- Oldiebut goodie
- Registered user
- Posts: 7515
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Q.? How to replace 1.6td jx Head Gasket ??
Wiki at top of page?
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
-
matvanslam
- Registered user
- Posts: 0
- Joined: 06 May 2009, 16:54
Re: Q.? How to replace 1.6td jx Head Gasket ??
thanks for the link, But, still Need detailed advice/link specific to HeaD Gasket Replacement.....
step by step link/advice from anyone really, (badly!) needed
thanks
Mat
step by step link/advice from anyone really, (badly!) needed
thanks
Mat
-
Plasticman
- Trader
- Posts: 8081
- Joined: 12 Oct 2005, 20:55
- 80-90 Mem No: 1948
- Location: lincolnshire
Re: Q.? How to replace 1.6td jx Head Gasket ??
Sorry fella but if you know so little then we cant really educate / teach you in a few postings, as said study the wiki, also get a manual study some more and believe me all you need to know is there, you just have to study it
mike
mike
-
matvanslam
- Registered user
- Posts: 0
- Joined: 06 May 2009, 16:54
Re: Q.? How to replace 1.6td jx Head Gasket ??
Hey, I can't find it under your Wiki lead.
I'm more than willing to "study" the proceedure, but need a link that gives me something to study.
If, you can tell me where on Wiki I will find the info that would be advice much appreciated,
Don't have a Haynes but do have the official factory repair manual by Robert Bentley which, although twice as thick as a Haynes gives absolutely no worded step by step instructions.
I am very capable of most jobs but don't like to learn by mistakes if the correct proceedures can be learned first, any other links to this query from anyone please ??
I'm more than willing to "study" the proceedure, but need a link that gives me something to study.
If, you can tell me where on Wiki I will find the info that would be advice much appreciated,
Don't have a Haynes but do have the official factory repair manual by Robert Bentley which, although twice as thick as a Haynes gives absolutely no worded step by step instructions.
I am very capable of most jobs but don't like to learn by mistakes if the correct proceedures can be learned first, any other links to this query from anyone please ??