Do you have rear belts in your Autosleeper ?

Post by **earlybay** » 06 Oct 2010, 12:21

None in mine at the moment but has anyone got a pic of where theirs are mounted in the rear - even if its just lap belts ? Im assuming there must be mount points under the rear seat but cant find them - they were there on my old Caravelle ....

Post by **nickster72** » 06 Oct 2010, 12:26

Hi,

I'm hopefully getting 2 3-point rear seatbelts installed in my 1980 T25 High-top in a few weeks as I need them so my kids car seats will fit.

It's gonna be expensive but worth it, i'll let you know what they do once it's done.

Oh just noticed you're in Paddock Wood me too

Post by **Ian Hulley** » 06 Oct 2010, 12:37

earlybay wrote:None in mine at the moment but has anyone got a pic of where theirs are mounted in the rear - even if its just lap belts ? Im assuming there must be mount points under the rear seat but cant find them - they were there on my old Caravelle ....

Caravelle body shells have them panel vans don't, you can improvise by welding the mounting plates into the body. Our rear lapbelts are bolted through the body at the top of the ramp with HT bolts and thick re-inforcing steel plate washers. The tester laughed and said they are a very long way over the standard of the factory fitted belts.

Post by **roberts-t25** » 06 Oct 2010, 12:40

Have a look at these pics, not very conclusive, but they'll give you an idea.

Form what we've been told there's just enough room (legally) to have three lap belts.

Post by **scottbott** » 06 Oct 2010, 20:50

mine is the same as roberts-T25,happy enough with two lapbelts

Post by **triumphboy** » 06 Oct 2010, 21:06

scottbott wrote:mine is the same as roberts-T25,happy enough with two lapbelts

Same as my '85 Autosleeper

Post by **BOXY** » 07 Oct 2010, 09:07

Not a great photo but you get the idea.

IMG_0261.JPG

Post by **earlybay** » 07 Oct 2010, 10:11

thanks for that all - gives me some ideas - looks like the AutoSleepers werent built on a Caravelle base then .. we have 3 children so going to try and get three lap belts in there ...

Post by **1664** » 07 Oct 2010, 11:02

Mine's an Autohomes but for what it's worth this is how they fitted two lapbelts.

The steel plates behind the mounts is about 4mm thick. If you widen the centre plate and double belts up on individual mountings I can't see any reason you can't fit three.

Post by **lloydy** » 07 Oct 2010, 13:02

My auto homes had 3. fine for 2 children one adult

Post by **insitu_mouldings** » 07 Oct 2010, 13:56

2 in my autohomes same as in the pic

Post by **martbass** » 21 Oct 2010, 21:14

Out of interest............

I don't have rear belts in my camper.........obviously from safety point of view it's not wise to sit in the rear without belts but anyone know what's the law on this?

is a passenger allowed to travel in rear without them?

Post by **kevtherev** » 21 Oct 2010, 21:20

If they are not fitted at the factory
you don't have to fit them.

I choose not to fit them and folks who sit in the back are not breaking the law

Club 80-90 Forums

Do you have rear belts in your Autosleeper ?

Do you have rear belts in your Autosleeper ?

Re: Do you have rear belts in your Autosleeper ?

Re: Do you have rear belts in your Autosleeper ?

Re: Do you have rear belts in your Autosleeper ?

Re: Do you have rear belts in your Autosleeper ?

Re: Do you have rear belts in your Autosleeper ?

Re: Do you have rear belts in your Autosleeper ?

Re: Do you have rear belts in your Autosleeper ?

Re: Do you have rear belts in your Autosleeper ?

Re: Do you have rear belts in your Autosleeper ?

Re: Do you have rear belts in your Autosleeper ?

Re: Do you have rear belts in your Autosleeper ?

Re: Do you have rear belts in your Autosleeper ?