Are there early and late rear engine splash guards?

Post by **Cruz** » 29 Sep 2010, 23:37

Are the rear splash guards (no 3 on image link below) different on early and late vans?

If so when fitting the later engine mount bracket (with the silencer hangers) will the early splash guard get in the way?

http://autopartmaster.com/imgbank/cat/v ... t=2220043C

Post by **Aidan** » 30 Sep 2010, 05:47

same since 1983 model year

Post by **kevtherev** » 30 Sep 2010, 06:45

Cruz
I had the early exhaust Heat shroud
When I changed to the late exhaust (with the saddles) I cut the tin ware to allow the saddle mounts to come through.
I followed the already creased lines

worked a treat

Or you can get a second hand shroud from Billy739 and the like

Post by **billy739** » 30 Sep 2010, 06:57

from memory the rear seems the same , one of the side pieces definatly comes in 2 slightly different shapes, not sure about the other side tho.

Post by **kevtherev** » 30 Sep 2010, 07:00

billy739 wrote:from memory the rear seems the same , one of the side pieces definatly comes in 2 slightly different shapes, not sure about the other side tho.

there are cut aways for the hangers billy on the late shrouds.
I looked at shepsters new engine and the shroud that came with it was different in that respect.

Ironically he has returned to the early exhaust so those gaps are not used

Post by **Ian Hulley** » 30 Sep 2010, 08:23

The later nearside splashguard has a hole formed in it to allow for the metal water pipe from the pump to the t/stat housing, there's no difference on the offside as I'm aware ?

Ian

Post by **Cruz** » 30 Sep 2010, 09:21

Found this pic on the web. Not a great image but is this a late shield?

Post by **Ian Hulley** » 30 Sep 2010, 10:51

It's had it's downwards bracketty bits bent up but it looks like the late styleeee.

Ian

Post by **kevtherev** » 30 Sep 2010, 11:00

I think it's upside down Ian

Post by **Ian Hulley** » 30 Sep 2010, 11:08

kevtherev wrote:I think it's upside down Ian

Smartasre

Post by **Ian Hulley** » 30 Sep 2010, 14:23

These are the early styleee side splash guards ...

Note the nearside one DOESN'T have the cut out I mentioned earlier

Ian

Post by **Cruz** » 30 Sep 2010, 19:09

kevtherev wrote:I think it's upside down Ian

Like this?

Post by **kevtherev** » 30 Sep 2010, 20:17

Hang on I've just found that on Ebay..
Be careful here there is talk on Brickyard that Syncrospares have stopped trading, I would call them first.

Having now seen a larger pic I can say more surely that it is what you want
I can see that what Ian says has a ring of truth as it looks wrong.
the expansion tank mount on the left is there and those cut outs should be going away from us.. not up
It should all bend back OK though

.... and, I'll say it again.. those cut outs can be cut into your own early shroud with some tin snips
the thing bolts on the same

Post by **Cruz** » 30 Sep 2010, 20:24

I am going to bastardise my own. I was just being curious

I enquired about another syncrospares item on fleabay and was told it was sold out

Club 80-90 Forums

Are there early and late rear engine splash guards?

Are there early and late rear engine splash guards?

Re: Are there early and late rear engine splash guards?

Re: Are there early and late rear engine splash guards?

Re: Are there early and late rear engine splash guards?

Re: Are there early and late rear engine splash guards?

Re: Are there early and late rear engine splash guards?

Re: Are there early and late rear engine splash guards?

Re: Are there early and late rear engine splash guards?

Re: Are there early and late rear engine splash guards?

Re: Are there early and late rear engine splash guards?

Re: Are there early and late rear engine splash guards?

Re: Are there early and late rear engine splash guards?

Re: Are there early and late rear engine splash guards?

Re: Are there early and late rear engine splash guards?