Swivel seat bases for Caravelle
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 15
- Joined: 22 Aug 2010, 17:30
- 80-90 Mem No: 8692
- Location: Leigh-on-Sea
Swivel seat bases for Caravelle
Hello, new boy here. Any opinions out there on what would be the best swivelling seat bases to buy. Bluebird offer them at £165 each and state that are a simple bolt in fit, JustKampers offer them at £158 each but say that modification 'may' be required to the tool box lid on Caravelles. Was wondering if for may I should read will. Thanks.
Tin Top 1.9 DG Caravelle GL - a bit of 1980's luxury!
- ..lee..
- Registered user
- Posts: 736
- Joined: 04 Jun 2006, 22:13
- 80-90 Mem No: 4478
- Location: llanelli, s wales
Re: Swivel seat bases for Caravelle
t3 /t4 ??
-
- Registered user
- Posts: 15
- Joined: 22 Aug 2010, 17:30
- 80-90 Mem No: 8692
- Location: Leigh-on-Sea
Re: Swivel seat bases for Caravelle
T3, didn't think to state that - will do better next time.
Tin Top 1.9 DG Caravelle GL - a bit of 1980's luxury!
- Ian Hulley
- Registered user
- Posts: 12661
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: Swivel seat bases for Caravelle
We have 2 bolt-in Westy/VW ones in our ex panel van.
Ian
Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
Re: Swivel seat bases for Caravelle
and you will no doubt have to remove the toolbox cover.as you will be unable to lift it once the base is fitted..
but say that modification 'may' be required to the tool box lid on Caravelles
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
- Registered user
- Posts: 15
- Joined: 22 Aug 2010, 17:30
- 80-90 Mem No: 8692
- Location: Leigh-on-Sea
Re: Swivel seat bases for Caravelle
Would the swivelling base not silde forward with the seat to give access to the tool box lid?
Tin Top 1.9 DG Caravelle GL - a bit of 1980's luxury!
Re: Swivel seat bases for Caravelle
no they are either welded or bolted to the runners..
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
- Registered user
- Posts: 43
- Joined: 12 Mar 2010, 15:28
- 80-90 Mem No: 7960
- Location: West Sussex
Re: Swivel seat bases for Caravelle
cherrydocs wrote:Would the swivelling base not silde forward with the seat to give access to the tool box lid?
Sorry to disagree with you Rob but our Westy has original seats that swivel and move forward to allow access to the tool/battery box.
However whilst you can lift the lid you need to undo some of the bolts to remove the battery as it's quite a tight fit.
-
- Registered user
- Posts: 15
- Joined: 22 Aug 2010, 17:30
- 80-90 Mem No: 8692
- Location: Leigh-on-Sea
Re: Swivel seat bases for Caravelle
Thanks for your comments, think I will get one to start with and see how the fitting goes. I wouldn't be prepared to loose sliding adjustment to the seat - bit of a strip down to get to the battery doesn't sound too offputting, better than throwing away the toolbox lid.
Tin Top 1.9 DG Caravelle GL - a bit of 1980's luxury!
Re: Swivel seat bases for Caravelle
cherrydocs was asking about after market ones.not original vw ones.and all the after market ones i have seen either bolt in or are welded in.
Sorry to disagree with you Rob but our our Westy has original seats that swivel and move forward to allow access to the tool/battery box.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
- Registered user
- Posts: 43
- Joined: 12 Mar 2010, 15:28
- 80-90 Mem No: 7960
- Location: West Sussex
Re: Swivel seat bases for Caravelle
Apologies cherrydocs if I misled you and thanks to Rob for putting me right. I had assumed that replacements would be to the same spec as the originals