noise from shaft /bearing /gearbox

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
gixster
Registered user
Posts: 12
Joined: 05 Jan 2010, 23:33
80-90 Mem No: 7725
Location: stourbridge

noise from shaft /bearing /gearbox

Post by gixster »

Hi all have had a strange noise coming from rear left hand wheel was a rumble and squeaking checked wheel bearing which had a little play so i replaced it put it all back togather and still the same took gear box end of shaft of ran the engine in gear and rfom what i could hear no noise put it back together and niose came back the squeaking is from wheel end of shaft i think or cold it be the gear box or drive shaft it a five speed and read on hear there not the best im now at a loss on what to do any help or andvice please

Plasticman
Trader
Posts: 8078
Joined: 12 Oct 2005, 20:55
80-90 Mem No: 1948
Location: lincolnshire

Re: noise from shaft /bearing /gearbox

Post by Plasticman »

Now then fella,hows you doing,still laughing from your visit, even the bliddy butcher asks.........

Now this here noise, I take it it only makes it when said bus is in motion?
Is this only forward motion or reverse as well? ha bet you never checked that did you.
Have you had it jacked up on one side at a time and run it.
give me a ring in the next 1/2hr else tommorow
Mike

gixster
Registered user
Posts: 12
Joined: 05 Jan 2010, 23:33
80-90 Mem No: 7725
Location: stourbridge

Re: noise from shaft /bearing /gearbox

Post by gixster »

Big thanks to metalmick8y for is help nice bloke who knows what hes talking about thks for your help mike

Rob88
Registered user
Posts: 8
Joined: 19 Aug 2009, 16:09
80-90 Mem No: 7265
Location: Manchester

Re: noise from shaft /bearing /gearbox

Post by Rob88 »

Hi gixster or metalmick8y,
Did you ever find and resolve the problem becos im having the same trouble and its driving me nuts..............
i really need it sorted.
many thanks rob

Plasticman
Trader
Posts: 8078
Joined: 12 Oct 2005, 20:55
80-90 Mem No: 1948
Location: lincolnshire

Re: noise from shaft /bearing /gearbox

Post by Plasticman »

Yep it was a cv joint, even though he checked them it was only when removed and rotated that it showed
mike

protexblue
Registered user
Posts: 75
Joined: 13 Oct 2005, 23:35
80-90 Mem No: 7456
Location: Nr Macclesfield

Re: noise from shaft /bearing /gearbox

Post by protexblue »

Thanks for feedback Mike, experiencing same problem after checking all wheel bearings, so cv joints next.
Cheers
Paul

Plasticman
Trader
Posts: 8078
Joined: 12 Oct 2005, 20:55
80-90 Mem No: 1948
Location: lincolnshire

Re: noise from shaft /bearing /gearbox

Post by Plasticman »

It was the outer (wheel end) by the way, as this is the harder to remove/grease/service, best to stick a new one in each outer for what they cost. most of the effort is in the removal
mike

Locked