Visco vs. Haldex - discuss
Moderators: User administrators, Moderators
- keeno
- Registered user
- Posts: 10
- Joined: 04 Aug 2009, 08:15
- 80-90 Mem No: 0
- Location: St. Agnes, Cornwall
Re: Visco vs. Haldex - discuss
Just to add a little, albeit slightly different experience with 4wd, I tested both my A4 tdi quattro and S4 quattro in 5 inches of snow last winter. The tdi was amazing, went straight, had amazin traction and was very predictable The S4 however, was tail-happy, oversteered like a bugger and was generally scary. I then found the reason: the tdi had a 50-50 drive split whereas the S4 had the 'sports' option of 60-40 rear torque bias. Amazing what diiference that made in tricky conditions. Drivin both cars was chalk and cheese.
1989 RHD Tristar Syncro
My other ride is a 572 hp DG Wasserboxer powered Oval...
My other ride is a 572 hp DG Wasserboxer powered Oval...
- syncropaddy
- Registered user
- Posts: 887
- Joined: 17 Oct 2005, 22:46
- 80-90 Mem No: 1019
- Location: Gorey, Co. Wexford, Ireland
Re: Visco vs. Haldex - discuss
keeno wrote:I then found the reason: the tdi had a 50-50 drive split whereas the S4 had the 'sports' option of 60-40 rear torque bias.
I wonder what the bias is on the Passat TDi 4motion
syncropaddy
One Syncro, five Mercedes Benzs and a rocket ship
One Syncro, five Mercedes Benzs and a rocket ship
-
- Trader
- Posts: 17229
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Visco vs. Haldex - discuss
Depends on the installation. I don't know if the inline V6 models are 3-diff (proper quattro) or Haldex coupled like transverse engine quattro/4motion. Bias is probably to the front, so rear wheel assistance comes in progressively as fronts start to slip, as I understand it.
1985 Oettinger 3.2 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 period alloys
- Trundler
- Registered user
- Posts: 171
- Joined: 08 Aug 2006, 12:08
- 80-90 Mem No: 2998
- Location: Nateby, Lancs
Re: Visco vs. Haldex - discuss
A far as I'm aware, regardless of what badge VAG choose to put on the boot lid, all the in-line engine cars (Audi A4, A6, A8 and the Passat) are proper quattro and all the transverse engined cars (Golf, A3, TT etc) are Haldex clutch and not really full time 4WD. I am a bit confused when it comes to Transporter T4s and T5s but I presume they are all viscous coupled Syncros, even if wearing a 4Motion badge.
I am from an era when all quattros were either fixed 50-50 split or mechanically variable via Torsen diff (25/75 to 75/25) I had no idea they were now producing S4s etc with a 60/40 split.
The bottom line is that the Syncro system and the original quatto 50-50 system, although "simple" both work very well indeed. I have no direct experience of the Haldex but reading the theory (and various road tests) makes me think it is a seriously compromised arrangement.
I am from an era when all quattros were either fixed 50-50 split or mechanically variable via Torsen diff (25/75 to 75/25) I had no idea they were now producing S4s etc with a 60/40 split.
The bottom line is that the Syncro system and the original quatto 50-50 system, although "simple" both work very well indeed. I have no direct experience of the Haldex but reading the theory (and various road tests) makes me think it is a seriously compromised arrangement.
1987 Type25 Transporter Syncro 2.1DJ
+ some other less important vehicles...
80-90 member no. 2998
+ some other less important vehicles...
80-90 member no. 2998
-
- Trader
- Posts: 17229
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Visco vs. Haldex - discuss
T4 and T5 are Haldex coupled i.e. FWD with rear assist.
All manufacturers seem to have abandoned Viscos in favour of the Haldex system (or versions thereof), which is now up to 5th Generation and also twin couplers on the SAAB x-drive system. Viscos just don't give the service life that manufactureres now demand.
About the last Viscos used in a way that syncro owners would recognise (but reversed) were things like the Freelander 1, which used to eat the VC every 60k if you were lucky. But it did have different diff ratios front to rear, to achieve the torque bias. So the VC was being worked all the time...What a BL bodge!
All manufacturers seem to have abandoned Viscos in favour of the Haldex system (or versions thereof), which is now up to 5th Generation and also twin couplers on the SAAB x-drive system. Viscos just don't give the service life that manufactureres now demand.
About the last Viscos used in a way that syncro owners would recognise (but reversed) were things like the Freelander 1, which used to eat the VC every 60k if you were lucky. But it did have different diff ratios front to rear, to achieve the torque bias. So the VC was being worked all the time...What a BL bodge!
1985 Oettinger 3.2 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 period alloys
- Trundler
- Registered user
- Posts: 171
- Joined: 08 Aug 2006, 12:08
- 80-90 Mem No: 2998
- Location: Nateby, Lancs
Re: Visco vs. Haldex - discuss
So, even the 'Syncro'-badged T4 had the Haldex system? I never knew that... 

1987 Type25 Transporter Syncro 2.1DJ
+ some other less important vehicles...
80-90 member no. 2998
+ some other less important vehicles...
80-90 member no. 2998
- Trundler
- Registered user
- Posts: 171
- Joined: 08 Aug 2006, 12:08
- 80-90 Mem No: 2998
- Location: Nateby, Lancs
Re: Visco vs. Haldex - discuss
silverbullet wrote:...Viscos just don't give the service life that manufactureres now demand.
I believe the same issue saw the demise of the G-lader supercharger.
1987 Type25 Transporter Syncro 2.1DJ
+ some other less important vehicles...
80-90 member no. 2998
+ some other less important vehicles...
80-90 member no. 2998
-
- Trader
- Posts: 17229
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Visco vs. Haldex - discuss
Yup. "quattro" and "syncro" became mere brand trademarks, rather than a description of the system fitted.Trundler wrote:So, even the 'Syncro'-badged T4 had the Haldex system? I never knew that...
1985 Oettinger 3.2 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 period alloys
Re: Visco vs. Haldex - discuss
"""There is nothing like the FWD just kicking in after the rear end has already gone critical, it doesn't feel part time or half-arsed either. The 4WD is very much permanent and it very much works."""
Could'nt agree more, In the snow this year....I forced a back end skid and the way the front end pulled out was exceptional, regaining control in a blink. VW built an impresive peice of kit.
Could'nt agree more, In the snow this year....I forced a back end skid and the way the front end pulled out was exceptional, regaining control in a blink. VW built an impresive peice of kit.
14" MV Syncro Caravelle aspiring to a Westy.
16" 1.9TD Syncro Crew Cab
...and for the really narrow lanes; Honda XR250 and CRF 230.
Join the TRF......help keep the lanes open!
16" 1.9TD Syncro Crew Cab
...and for the really narrow lanes; Honda XR250 and CRF 230.
Join the TRF......help keep the lanes open!