Carburettor advice

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
mark1967
Registered user
Posts: 30
Joined: 17 May 2009, 01:03
80-90 Mem No: 0
Location: Laid under van

Carburettor advice

Post by mark1967 »

Van was originally fitted with a 1.9 DG,at some point someone has put a DF engine in :roll: but has kept the Pierburg carb.Its got a few faults that I`ve found,it won`t idle, the pull down unit doesnt seem to be working and the secondary throttle diaphragm ( opens the 2nd barrel on the carb) although moving isnt working the butterfly. I think its just generally worn out.Would like to have it refurbed but don`t have the £170 to get it done yet.Leaves me with the option of another used carb which could possibly be as bad/worse.Would I be better off (if going for second hand) looking for a pict 34 and manifold or are these carbs just as bad?

Fritz
Registered user
Posts: 1628
Joined: 17 Jul 2006, 22:51
80-90 Mem No: 380
Location: Ormskirk, Lancashire

Re: Carburettor advice

Post by Fritz »

By the sound of things you know what to look out for when searching for a good second hand carb....If funds won't allow you to have yours re furbed, then this is your only option.


Regards

Fritz,,,,,,,,, .
One day you will find me,,
Driving in my Camper,
With a Surf and Paisley wrap on both sides....

Locked