I have the standard Vacuum Advance Dizzy fitted to my 2000cc Aircooled bus.
Just doing some final tuning, following a high rev misfire....so had dicided to change the coil, dizzy cap, arm, points etc.
Looking at the distributor I dont seem to have a condenser fitted to the outer body. Obviously removed in the past. I have a new one so want to fit it, can anyone help with the wires, there are two one that fits into the body of the dizzy and one longer one...
Distributor
Moderators: User administrators, Moderators
-
spet25
- Registered user
- Posts: 9
- Joined: 25 Feb 2008, 18:44
- 80-90 Mem No: 4803
- Location: Denton, Manchester
Re: Distributor
Mines a 2000cc Aircooled but it has electronic ignition. 
When i got it somebody had converted to the old points and condenser. its well worth hunting the parts to upgrade to electonic, However this is a matter of opinion, There are a few peeps on here that use the points and condenser.
hope this helps
When i got it somebody had converted to the old points and condenser. its well worth hunting the parts to upgrade to electonic, However this is a matter of opinion, There are a few peeps on here that use the points and condenser.
hope this helps