plug leads

An alchemy of sparks, copper wire and earth

Moderators: User administrators, Moderators

Locked
User avatar
johnnyvespa
Registered user
Posts: 266
Joined: 11 Nov 2008, 10:53
80-90 Mem No: 6131
Location: essex
Contact:

plug leads

Post by johnnyvespa »

are GSF plug leads any good , or are b/werks better . as thay are the same price.and how can you tell when
thay want changing :?: :?: :ok
hello i am john and i am looking forwored to metting outher 8090 members

Red Westie
Registered user
Posts: 706
Joined: 06 May 2007, 19:41
80-90 Mem No: 4712
Location: Nottingham UK

Re: plug leads

Post by Red Westie »

Depends on the brand each supplier is selling? you need to ask.
Generally leads do not need changing unless there is evidence of tracking or missfiring under load (same goes for distributor cap and rotor arm BTW) tracking is best seen from cold on a damp day, very short/small arcs coming from leads/caps etc to ground (engine or chassis) missfiring under load can be lots of this...plugs/caps/leads etc so is a little more dificult to diagnose.

Martin
On wings like angels whispers sweet
my heart it feels a broken beat
Touched soul and hurt lay wounded deep
Brown eyes are lost afar now sleep xxHayleyxx

User avatar
johnnyvespa
Registered user
Posts: 266
Joined: 11 Nov 2008, 10:53
80-90 Mem No: 6131
Location: essex
Contact:

Re: plug leads

Post by johnnyvespa »

thanks martin .it runs and starts fine . i have had it 3 years and put new cap and rotor arm on
. dont know when if thay have been changed as i have all service details but it dont say .
so i think i will leve it and have a look when it is cold and damp .thanks john . :D :ok
hello i am john and i am looking forwored to metting outher 8090 members

User avatar
SyncroSwede
Registered user
Posts: 71
Joined: 20 Mar 2008, 20:21
80-90 Mem No: 4977
Location: Devon.

Re: plug leads

Post by SyncroSwede »

I've just been to GSF not 'arf an hour ago for a rotor arm and I just asked what brand they stocked. It was Beru, which is German made & the same as the leads & coil I've had from Brickwerks. There is a section in Bentley's on how to test the impedance (if I recall correctly) of your leads etc to see if they are in specification but as stated, the easiest test is if the engine is running ok under load. I recently changed the leads etc as I had an electrical fault I was trying to eliminate. Turns out it was something else but for the money (and the age of the old parts) I was happy to change it.
1989 16" Syncro 2.1l WBX… replaced by a 2010 T5 GP

User avatar
johnnyvespa
Registered user
Posts: 266
Joined: 11 Nov 2008, 10:53
80-90 Mem No: 6131
Location: essex
Contact:

Re: plug leads

Post by johnnyvespa »

thanks for info , i will try it going slow in top gear up hill to see it it will miss .
it might pay to put new set on as you cant tell till you do , and i dont know how old thay are . thanks :ok
hello i am john and i am looking forwored to metting outher 8090 members

User avatar
johnnyvespa
Registered user
Posts: 266
Joined: 11 Nov 2008, 10:53
80-90 Mem No: 6131
Location: essex
Contact:

Re: plug leads

Post by johnnyvespa »

just had a look on e-bay , set of leads called popran from germany and set of bosch plugs .
£27.50. plus £4.50 post .sounds good but dont know the name of the leads . eny one heard
of them .thanks. :?:
hello i am john and i am looking forwored to metting outher 8090 members

User avatar
johnnyvespa
Registered user
Posts: 266
Joined: 11 Nov 2008, 10:53
80-90 Mem No: 6131
Location: essex
Contact:

Re: plug leads

Post by johnnyvespa »

sorry the leads are called topran . :ok
hello i am john and i am looking forwored to metting outher 8090 members

Red Westie
Registered user
Posts: 706
Joined: 06 May 2007, 19:41
80-90 Mem No: 4712
Location: Nottingham UK

Re: plug leads

Post by Red Westie »

Beru are better...... :ok
On wings like angels whispers sweet
my heart it feels a broken beat
Touched soul and hurt lay wounded deep
Brown eyes are lost afar now sleep xxHayleyxx

User avatar
johnnyvespa
Registered user
Posts: 266
Joined: 11 Nov 2008, 10:53
80-90 Mem No: 6131
Location: essex
Contact:

Re: plug leads

Post by johnnyvespa »

thanks i will go with them . :ok
hello i am john and i am looking forwored to metting outher 8090 members

Locked