Oil in cooling system, 1.6 td, do I flush or not?

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
User avatar
vag_glen
Registered user
Posts: 32
Joined: 01 Oct 2006, 07:45
80-90 Mem No: 5774
Location: west sussex

Oil in cooling system, 1.6 td, do I flush or not?

Post by vag_glen »

Morning guys, just bought my next project, 1988 Karmann Cheetah, The previous owner had a new oil cooler fitted and was advised to have the system flushed but never did, And hence the header tank next to the battery is as black as your hat! What's the best plan of action to clean/flush the system?,I've seen posted before that using engine flush isn't a good idea?.
Any help would be greatfull, it's my first ever oil burner!!!!
Ta Glen.

User avatar
HarryMann
Admin/Mod
Posts: 9610
Joined: 30 Sep 2005, 11:40
80-90 Mem No: 379
Location: Herts, UK

Re: Oil in cooling system, 1.6 td, do I flush or not?

Post by HarryMann »

Flush it, what harm can it do, lots of garages use cooling system flush, I did our Micra recently (weeping through head gasket I expect)

.. and change the oil & filter frequently in that TD. I use a 15W~40 semi-synth & buy a 20 litre container every year as my upfront oil cooler and hoses up the total capacity from 4.5 to nearer 7 litres

http://www.nielsencdg.co.uk/acatalog/Co ... ls_6L.html

Make sure the air-filter is clean, can sap power and fuel, should have the big cyclone filter with large tubular cartridge - about a tenner - even the 1.6's pass a lot of air and yours will be working hard alot of the time.

Recommended (& guaranteed to frighten) - an oil temp or pressure gauge, they tend to be much the same thing, just work in reverse to each other....

The 80-90 Tech Wikipedia Your 1st port of call :idea

Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1

User avatar
vag_glen
Registered user
Posts: 32
Joined: 01 Oct 2006, 07:45
80-90 Mem No: 5774
Location: west sussex

Re: Oil in cooling system, 1.6 td, do I flush or not?

Post by vag_glen »

Thank you harrymann, yeah head gasket is suspect and being changed, I just remember reading about not using flushing agents on the 2.1 wasserboxer, did have a look in wiki but just wanted a second opinion.

Glen.

User avatar
windysurfer
Registered user
Posts: 996
Joined: 14 Jun 2007, 18:58
80-90 Mem No: 3805
Location: Lancashire

Re: Oil in cooling system, 1.6 td, do I flush or not?

Post by windysurfer »

Any Pictures :mrgreen:

Karmanns are the future :pimp
If Carlsberg made Coachbuilts...........Image T4 Karmann Colorado

Locked