have developed a really annoying and loud squeak as we are driving, literally even on a nice flat piece of road it is squeaking something rotten and with a trip to france coming up it is going to get really annoying !!
wife thinks it comes from front end drivers side and i think front end passengers side!!! petrol tank was replaced recently but seems nice and tightly fitted with very little play in the brackets
are there any usual culprits before i start looking too deeply into where it is coming from?? its definately at the front end of the van
annoying squeak
Moderators: User administrators, Moderators
Re: annoying squeak
Had the same thing... some nicely lubricated wishbone bushes did the trick. Got mine from Brickwerks.
RHD Syncro twin slider (AGG) - orange
- weldore
- Registered user
- Posts: 5595
- Joined: 17 Aug 2008, 22:36
- 80-90 Mem No: 5833
- Location: North Notts
Re: annoying squeak
^^^^^^ WHS..when your both sat on top of the culprit you cant work out which side it is.
its an embarrassing noise too when in urban areas
its an embarrassing noise too when in urban areas

the word 'pissing' is safe
Dave and gail.....1983 Pop Top 1.9n/a diesel (aka Ready Steady Eddie)
Dave and gail.....1983 Pop Top 1.9n/a diesel (aka Ready Steady Eddie)
-
- Registered user
- Posts: 145
- Joined: 12 Mar 2010, 21:06
- 80-90 Mem No: 7961
- Location: Isle of Wight
Re: annoying squeak
had a good squirt around with wd40 underneath and checked eveything like battery trays etc but still no joy - very frustrating !
-
- Registered user
- Posts: 145
- Joined: 12 Mar 2010, 21:06
- 80-90 Mem No: 7961
- Location: Isle of Wight
Re: annoying squeak
dcfb77
were the bushes easy to fit?? on brickwerks site says you need cutting and grinding equipment??
iowcamper
were the bushes easy to fit?? on brickwerks site says you need cutting and grinding equipment??
iowcamper
- weldore
- Registered user
- Posts: 5595
- Joined: 17 Aug 2008, 22:36
- 80-90 Mem No: 5833
- Location: North Notts
Re: annoying squeak
its all in the wiki mate
you dont need a grinder to sort out the tacks..you can hacksaw them..but you will need someone to put the tacks on after you have fitted them(unless you have a welder)

you dont need a grinder to sort out the tacks..you can hacksaw them..but you will need someone to put the tacks on after you have fitted them(unless you have a welder)
the word 'pissing' is safe
Dave and gail.....1983 Pop Top 1.9n/a diesel (aka Ready Steady Eddie)
Dave and gail.....1983 Pop Top 1.9n/a diesel (aka Ready Steady Eddie)
- weldore
- Registered user
- Posts: 5595
- Joined: 17 Aug 2008, 22:36
- 80-90 Mem No: 5833
- Location: North Notts
Re: annoying squeak
here you go...
https://club8090.co.uk/wiki/St ... one_bushes" onclick="window.open(this.href);return false;
https://club8090.co.uk/wiki/St ... one_bushes" onclick="window.open(this.href);return false;
the word 'pissing' is safe
Dave and gail.....1983 Pop Top 1.9n/a diesel (aka Ready Steady Eddie)
Dave and gail.....1983 Pop Top 1.9n/a diesel (aka Ready Steady Eddie)
- CovKid
- Trader
- Posts: 8411
- Joined: 30 Apr 2006, 13:19
- 80-90 Mem No: 3529
- Location: Ralph - Coventry (Retired)
- Contact:
Re: annoying squeak
The line "unless you're dicking about with some toffee stick of a hammer" still makes me roar. Glad it was left in 

Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.
Re: annoying squeak
Getting them out wasn't that bad. Getting them in needed patience....
I used putty metal weld stuff instead of welding and seems.to be on there quite strongly.
Good luck
I used putty metal weld stuff instead of welding and seems.to be on there quite strongly.
Good luck
RHD Syncro twin slider (AGG) - orange