MOre problems
My nearside wheel is making a lot of noise and I susspect the wheel bearings. I have packed the outer bearing with grease but its still the same.
Hear are my questions
Do i need to replace both inner and outer wheel bearings? or does one or the other normally go on its own?
Cheers guys
Wheel bearings
Moderators: User administrators, Moderators
- albertramsbottom
- Trader
- Posts: 137
- Joined: 18 Aug 2008, 08:38
- 80-90 Mem No: 5813
- Location: Lampeter, West Wales
- Contact:
Wheel bearings
2ltr 1982 Aircooled
Street Decals
Vinyl FX Graphics
Design, Creation and application of leading edge vinyl graphics.
Vehicle signage, windows, and decals
http://www.streetdecals.co.uk
Street Decals
Vinyl FX Graphics
Design, Creation and application of leading edge vinyl graphics.
Vehicle signage, windows, and decals
http://www.streetdecals.co.uk
Re: Wheel bearings
Replacements usually come as a kit which includes the inner and outer, as well as the seal and split-pin (Always but always use a new split pin)
Would recommend replacing both while you have the hub removed and then you can fit & forget about it for another few thousand miles.
Would recommend replacing both while you have the hub removed and then you can fit & forget about it for another few thousand miles.
- albertramsbottom
- Trader
- Posts: 137
- Joined: 18 Aug 2008, 08:38
- 80-90 Mem No: 5813
- Location: Lampeter, West Wales
- Contact:
Re: Wheel bearings
Right thanks for that
I shall do both on both wheels
Cheers
I shall do both on both wheels
Cheers
2ltr 1982 Aircooled
Street Decals
Vinyl FX Graphics
Design, Creation and application of leading edge vinyl graphics.
Vehicle signage, windows, and decals
http://www.streetdecals.co.uk
Street Decals
Vinyl FX Graphics
Design, Creation and application of leading edge vinyl graphics.
Vehicle signage, windows, and decals
http://www.streetdecals.co.uk