i have put a 2.0l Aircooled engine in my van to replace the ct
i have just got hold of a 2.0l Aircooled (dk) gearbox what do i need to do
it is basicaly a bare gear box there is a bracket on the box
2.0l gearbox into a 1600ct van
Moderators: User administrators, Moderators
-
umgum
- Registered user
- Posts: 330
- Joined: 17 Jul 2007, 11:53
- 80-90 Mem No: 3972
- Location: warrington
- Contact:
2.0l gearbox into a 1600ct van
http://s261.photobucket.com/albums/ii67 ... bay007.jpg" onclick="window.open(this.href);return false;
Re: 2.0l gearbox into a 1600ct van
only difference will be the ct is cable clutch the dk hydraulic.
eith chane the bellhousings or just the lever parts , which may be difficult due to seizure!
eith chane the bellhousings or just the lever parts , which may be difficult due to seizure!
-
toomanytoys
- Trader
- Posts: 2872
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: 2.0l gearbox into a 1600ct van
As I said earlier...
But changing the arms will be difficult, they dont like to come apart after 30 years.... bellhousing swap is easier..
And as I also said, going hydraulic means fitting a master cyl at the pedal box.. it may mean changing the pedal box to a hydraulic one as I dont know if they are different (I would imagine thay are)
But changing the arms will be difficult, they dont like to come apart after 30 years.... bellhousing swap is easier..
And as I also said, going hydraulic means fitting a master cyl at the pedal box.. it may mean changing the pedal box to a hydraulic one as I dont know if they are different (I would imagine thay are)