Hi all
In the process of doing the head gaskets on my van. Has anyone got any info on setting the valve clearance and what position the engine should be in? Its a 1.9 wbx. Thanks
Mitch
Setting valve clearances on 1.9 wbx
Moderators: User administrators, Moderators
-
mitchgreensill
- Registered user
- Posts: 8
- Joined: 03 May 2010, 15:18
- 80-90 Mem No: 0
- Location: Bridgtown M6 Jct11
-
dj biz r
- Registered user
- Posts: 40
- Joined: 22 Oct 2009, 19:08
- 80-90 Mem No: 8022
- Location: sw london
- Contact:
Re: Setting valve clearances on 1.9 wbx
try the wiki fella,good luck
-
skint-van-man
- Registered user
- Posts: 22
- Joined: 19 May 2009, 15:50
- 80-90 Mem No: 6821
- Location: Bedfordshire
Re: Setting valve clearances on 1.9 wbx
haynes bible aint too bad or there should be plenty of posts on here.
I did it... not as hard as you think.
good luck
I did it... not as hard as you think.
good luck
-
ghost123uk
- Registered user
- Posts: 6855
- Joined: 10 Mar 2006, 10:15
- 80-90 Mem No: 2585
- Location: John in Malpas, in the very S. W. part of Cheshire.
- Contact:
Re: Setting valve clearances on 1.9 wbx
All the info you need is here (in our wiki) = https://club8090.co.uk/wiki/Hy ... _explained" onclick="window.open(this.href);return false;
Have disturbed the liners whilst getting the heads off ?
Have you got the special sealer for the head bolts ?
Have disturbed the liners whilst getting the heads off ?
Have you got the special sealer for the head bolts ?
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here