I did notice that the thread turns in the shock, how are you supposed to tighten the nut if threaded bit turns.
Cheers Rob.
front shocks
Moderators: User administrators, Moderators
front shocks
I have to change the fronts tomorrow are they easy enough?
I did notice that the thread turns in the shock, how are you supposed to tighten the nut if threaded bit turns.
Cheers Rob.
I did notice that the thread turns in the shock, how are you supposed to tighten the nut if threaded bit turns.
Cheers Rob.
-
Ian Hulley
- Registered user
- Posts: 12661
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: front shocks
The top end of the rod ( 
) has a rectangular part which is 7 or 8mm for you to hold as you tighten the nut.
Ian.
) has a rectangular part which is 7 or 8mm for you to hold as you tighten the nut.Ian.
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
Re: front shocks
Easy when you know how. 
Cheers Ian.
Cheers Ian.