header tank

Post by **Ian Hulley** » 29 Mar 2010, 18:50

Yep, sorry ... Mr Baxter's guidance

Ian

Post by **simony** » 29 Mar 2010, 19:03

ian have pm,d you

Post by **meridian911** » 31 Mar 2010, 18:55

well just in case anyones interested i've had the coolant sniffed at a garage today and there's no sign of any gasses in the coolant.

so i guess i'll try the latest new cap from brickwerks and a good bleed of the system tommorow.
The new cap from brickwerks does look slightly diffent to the last one from them, the tops kinda flat where as the other was a bit rounded.

Post by **simony** » 01 Apr 2010, 05:32

any different ?

Post by **meridian911** » 01 Apr 2010, 21:07

seems to be fixed

bled the system on ramps as well for good measure

Post by **Ian Hulley** » 01 Apr 2010, 21:45

Well done, I hope you realise that you can't bleed the T25 on a slope ... according to some.

Just to be warned, check your van both ways up. After filling from the rear (

) I always like to get the nose in the air and check the rad too.

Ian

Club 80-90 Forums

header tank

Re: header tank

Re: header tank

Re: header tank

Re: header tank

Re: header tank

Re: header tank