found antiroll bar link int street.can i use a second hand 1

[oldiguana]

yo dudes....drove the missus work this mornin cause i still havent got a mota.....the anti roll bar drop link has been ready for a change...then this mornin found the bottom half of it in the street!!!!!!!....r they hard to change....how do you get the rubber over the end of the anti roll bar..........thanks in advance

[armyphil]

Plenty of lube and pressure mine pop off quite a bit really isn't that hard, it's worth upgrading to polyurethane while your at it

[andisnewsyncro]

Plenty of lube and pressure mine pop off

Sorry

[mark1967]

As said already a good squirt of lube (I use washing up liquid ) will get it over the blob on the end of the anti roll bar itself.It seemed to go easier by dropping the entire bar,getting the threaded end of the links in place then wrestle the rest into position and bolt it all up.

[Steve T]

oldiguana

Check this link out from a previous thread, it has the info you require

https://club8090.co.uk/forum/viewtopic.p ... 2#p7361604" onclick="window.open(this.href);return false;

cheers

[oldiguana]

ta duck!!!!