Any reason I can't use one of these.....

[72BUG]

Instead of paying £120+ for a VW seat swivel.

http://cgi.ebay.co.uk/Motorhome-Boat-Va ... 3ca760870b

[scottbott]

that is a real good price if it is any good,will have to keep an eye out on this post to see if you get a reply

[Ian Hulley]

Because you'll have no forwards/backwards adjustment unless you have 25 runners welded to the top ... thus increasing the height ... thus reducing space for fat legs under the steering wheel and vision out of the windows.

Martin my honest advice would be to save up and buy a T25 bolt-in swivel, trust me, I've been there

Ian

[Damien]

As above unless you got a set of saab seats whihc are a bit thinner and built in runners and bolted them to the top and removed van runners and bolted em down.

[72BUG]

Because you'll have no forwards/backwards adjustment unless you have 25 runners welded to the top ... thus increasing the height ... thus reducing space for fat legs under the steering wheel and vision out of the windows.

Martin my honest advice would be to save up and buy a T25 bolt-in swivel, trust me, I've been there

Ian

Good point. Thanks Ian. Although in this case it wouldn't be a problem because I only want one for the passenger side, so it wouldn't matter about losing the slide function or a slight increase in height.

[Ian Hulley]

Jack always reckoned our's gave her a bad back 'cos her feet didn't touch the floor .... and she's the one wi't long legs

Guess it depends what seats you're planning to use ... as has been said.

Ian

[72BUG]

Jack always reckoned our's gave her a bad back 'cos her feet didn't touch the floor .... and she's the one wi't long legs

Guess it depends what seats you're planning to use ... as has been said.

Ian

Just got hold of a set of Porsche seats coz mine are about crackered but haven't had chance to have a good look at them yet so I'm not sure how thick they are in relation to the originals. I'll have a butchers tomorrow.