Square lights wiring?

Post by **ninja.turtle007** » 11 Feb 2010, 19:41

Converting from round to square- are the inner smaller square lights supposed to headlights, main beam or fogs?

Thanks

Tom

Post by **eatcustard** » 11 Feb 2010, 19:59

I think full beam

Fog lights are low to the ground

Post by **Cruz** » 11 Feb 2010, 20:04

Full beam H3

Post by **ninja.turtle007** » 11 Feb 2010, 20:09

Cheers!

Post by **Red Westie** » 12 Feb 2010, 18:39

Would be an ideal time to carry out the relay mod.....basically ensuring full battery voltage reaching the bulbs. Do a wiki

Martin

Post by **ninja.turtle007** » 12 Feb 2010, 19:11

Red Westie wrote:Would be an ideal time to carry out the relay mod.....basically ensuring full battery voltage reaching the bulbs. Do a wiki

Martin

I had a look but couldn't find it on Wiki. Any chance of a link please?

Post by **Red Westie** » 13 Feb 2010, 10:30

Hi
You would need to buy two 40amp standard 4 pole relays, a few meters of thick cable (to handle over 20 amps so 3mm at least) eyelets, spade connectors a fuse holder with 25amp fuse and good crimping tool.

Wiring like this:

Martin

Club 80-90 Forums

Square lights wiring?

Square lights wiring?

Re: Square lights wiring?

Re: Square lights wiring?

Re: Square lights wiring?

Re: Square lights wiring?

Re: Square lights wiring?

Re: Square lights wiring?