hot split charge ?

An alchemy of sparks, copper wire and earth

Moderators: User administrators, Moderators

hixsy
Registered user
Posts: 157
Joined: 27 Aug 2009, 10:44
80-90 Mem No: 7322
Location: birmingham

Re: hot split charge ?

Post by hixsy »

errrr not to sure how id know that m8.

its me stereo/ICE/lighting running of the 2nd battery, as the starter is fine. im not sure if thats relevant info. how would how much current im drawing ?

also with a 40amp relay how would you put 16mm2 cable onto it when you cant use push fit terminals ?
bye bye orange ! hello white !

User avatar
CovKid
Trader
Posts: 8411
Joined: 30 Apr 2006, 13:19
80-90 Mem No: 3529
Location: Ralph - Coventry (Retired)
Contact:

Re: hot split charge ?

Post by CovKid »

Could be ithe ICE (possibly) but both Chickenkoop and I have the same set up using 40amp relays and we've not had melted fuse holders or any issues with them.
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.

hixsy
Registered user
Posts: 157
Joined: 27 Aug 2009, 10:44
80-90 Mem No: 7322
Location: birmingham

Re: hot split charge ?

Post by hixsy »

maybe the 2 amps could be drawing a lot but hopefully it should be ok with upgraded stuff. how can i find how much current/amps im using ?

my lighting is all LED of the 2nd battery too
bye bye orange ! hello white !

User avatar
CovKid
Trader
Posts: 8411
Joined: 30 Apr 2006, 13:19
80-90 Mem No: 3529
Location: Ralph - Coventry (Retired)
Contact:

Re: hot split charge ?

Post by CovKid »

You must know the wattage of your ICE. Use this mate: http://www.ohmslawcalculator.com/ohms_l ... ulator.php" onclick="window.open(this.href);return false; You only need two figures and you know you're on 12.5v
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.

hixsy
Registered user
Posts: 157
Joined: 27 Aug 2009, 10:44
80-90 Mem No: 7322
Location: birmingham

Re: hot split charge ?

Post by hixsy »

wooooo i am really confused now lol ! wat the hell is that thing LOL

my amps are 1000w 4 channel and another running 80w(RMS) 2 channel, stereo is 4 x 45w not sure about the lighting . . .

as a ball park figure i put 1200 in the power(W) and 12.5 in voltage, i get 96amps, does that sound about right ? im not sure LOL
bye bye orange ! hello white !

Cafnod
Registered user
Posts: 35
Joined: 03 Sep 2009, 09:05
80-90 Mem No: 7507
Location: Hereford, Worcester, Chepstow

Re: hot split charge ?

Post by Cafnod »

Hi mate
You divide watts by volts to get amps,=9.6. You can run that for about 4-5 hours on a 100 amp battery if its fully charged to begin with cos you cant take a battery below half its max capacity.
The relay you have ordered looks fine to me. With associated wiring that should future proof your leisure charging system.
RW Yes the relays and the cables do look close together dont they? Good job there was no power to any of it as I pointed out it was half finished. Looked much better once the tufnol inserts were put in, and the panel between 12vdc and 240vac services was installed. Amongt other mods I was behind there yesterday bit didnt have the camera.

hixsy
Registered user
Posts: 157
Joined: 27 Aug 2009, 10:44
80-90 Mem No: 7322
Location: birmingham

Re: hot split charge ?

Post by hixsy »

ok got me stuff in now guys, back upto to both batteries reading the same of the voltmeter, no hot terminals . . .yet... lol
bye bye orange ! hello white !

Cafnod
Registered user
Posts: 35
Joined: 03 Sep 2009, 09:05
80-90 Mem No: 7507
Location: Hereford, Worcester, Chepstow

Re: hot split charge ?

Post by Cafnod »

Excellent, glad it all went well and you should have a nice peaceful future at least as far as leisure electrics are concerned, well done.

Locked