how far is safe

Post by **surfingphatkid13** » 09 Jul 2006, 17:17

just got some alloys and was wondering how much the bolt has 2 go through the wheel nut i still have standerd bolts

Post by **R0B** » 09 Jul 2006, 17:26

what wheels are they.the chances are with alloys you will need longer bolts and studs.you may need spacers for the front wheels as well.

Post by **surfingphatkid13** » 09 Jul 2006, 18:08

i got 15"merc wheels i"ve got longer studs 4 front +spacers on the back the bolts go half way through the nuts is ths enough ? is it a tough job 2 put new bolts on as i"ve been told u have e take off the whole hub

Post by **R0B** » 09 Jul 2006, 18:15

i think you need to change the studs.its not that tough of a job.ive done mine.we are talking about safety here.if you dont change them.imagine what could happen....

Post by **surfingphatkid13** » 09 Jul 2006, 18:24

iwill change them it"s playing on me mind that its not safe

Post by **R0B** » 09 Jul 2006, 18:29

shame you dont live closer to me.i would gladly give you a hand...remember to buy two new split pins for the rear castelated hub nuts...

Post by **surfingphatkid13** » 10 Jul 2006, 19:42

cheers m8 thanks 4 the offer m8! this my 1st bus and the help from the forum
is so handy !gonna have a crack at it myself will let u know how i get on

Post by **OLD ONE** » 10 Jul 2006, 20:21

Hi Where in Essex are you. I can possibly give you a hand if you can get to me. I have most, if not all tools for the job, plus a few years in the motor trade. Must admit , my Bus was made after I finished in the trade. hence my user name. Let me know. ....Cheers..OLD ONE

Club 80-90 Forums

how far is safe

how far is safe

merc wheels

cheers

thanks 4 the offer

HOW FAR IS SAFE