www.before-n-after.co.uk waxoyl
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 8
- Joined: 10 Dec 2008, 10:55
www.before-n-after.co.uk waxoyl
i was wondering if anyone has used http://www.before-n-after.co.uk ? is it good and worth the money?
- jebiga41
- Trader
- Posts: 756
- Joined: 15 Mar 2008, 15:50
- 80-90 Mem No: 5654
- Location: dublin ireland
- Contact:
Re: www.before-n-after.co.uk waxoyl
seems expensive for the equivalent of washing and wire brushing followed by waxoyling it but probably a lot easier seems to have a bit of custom off the landy guys tho
VW T3/T25 and Syncro Gearbox rebuilds
http://vantopia.ie
http://vantopia.ie
- SyncroSwede
- Registered user
- Posts: 71
- Joined: 20 Mar 2008, 20:21
- 80-90 Mem No: 4977
- Location: Devon.
Re: www.before-n-after.co.uk waxoyl
Seems a lot of money to me. I did a good bit of prep and de-grotting and bought a tin of the brush on Waxoyl and a cheap set of brushes and spent a weekend getting covered in the stuff. It is far cheaper, you know the job is done thoroughly and it's also strangely satisfying when you see it all done. Probably cost me £20 or so... 

1989 16" Syncro 2.1l WBX… replaced by a 2010 T5 GP
- cubensis
- Registered user
- Posts: 124
- Joined: 02 Jun 2008, 23:00
- 80-90 Mem No: 15337
- Location: Manchester
Re: www.before-n-after.co.uk waxoyl
SyncroSwede how did you get under to do it? You lying on your back or have your got a high jack or something?
1986 WBX 1.9 DG engine (originally a DF engine)
- SyncroSwede
- Registered user
- Posts: 71
- Joined: 20 Mar 2008, 20:21
- 80-90 Mem No: 4977
- Location: Devon.
Re: www.before-n-after.co.uk waxoyl
A fair question. Have you seen a 16" Syncro up close? There's probably 30cm of ground clearance on my standard bus! Other jobs that require spanner space I use a friends ramps, which makes a huge difference.
Tip: Don't do it on a really hot day as the waxoyl turns to water! A slightly warm day helps though.
Tip: Don't do it on a really hot day as the waxoyl turns to water! A slightly warm day helps though.
1989 16" Syncro 2.1l WBX… replaced by a 2010 T5 GP
- cubensis
- Registered user
- Posts: 124
- Joined: 02 Jun 2008, 23:00
- 80-90 Mem No: 15337
- Location: Manchester
Re: www.before-n-after.co.uk waxoyl
Not got a syncro or drive so may have to fork out £100 for garage near me to do it, frustrating!
1986 WBX 1.9 DG engine (originally a DF engine)
- SyncroSwede
- Registered user
- Posts: 71
- Joined: 20 Mar 2008, 20:21
- 80-90 Mem No: 4977
- Location: Devon.
Re: www.before-n-after.co.uk waxoyl
£100 isn't a bad price if they do a decent job. Check Mr before-n-after's prices... 

1989 16" Syncro 2.1l WBX… replaced by a 2010 T5 GP
- gsmoke
- Registered user
- Posts: 74
- Joined: 04 Dec 2006, 21:09
- 80-90 Mem No: 2975
- Location: SOUTH WALES
Re: www.before-n-after.co.uk waxoyl
All you need to do is drive over a cheap plastic decorating plastic.
Jack up the four corners as you go round. Wear the worst clothes you own, (including hat) and knackered old shoes. Use a big tin of waxoil with the sprayer that you can buy with it.
A good tip is to heat the tin in warm water to soften the waxoil.
Its all done in a morning including tea and fag breaks, and you'll know that its been done properly.
Total cost was about 25 squid but the satisfaction is priceless!
Ps I id mine in the street outside my house, no probs.
Jack up the four corners as you go round. Wear the worst clothes you own, (including hat) and knackered old shoes. Use a big tin of waxoil with the sprayer that you can buy with it.
A good tip is to heat the tin in warm water to soften the waxoil.
Its all done in a morning including tea and fag breaks, and you'll know that its been done properly.
Total cost was about 25 squid but the satisfaction is priceless!
Ps I id mine in the street outside my house, no probs.
- kevtherev
- Registered user
- Posts: 18832
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: www.before-n-after.co.uk waxoyl
waxoyl doesn't stick to paint very well Helga
Remember this Rusting is a chemical process... remove oxygen from the process, which is what waxoyl does.. and it simply stops. rusty or not.
which requires that the area to be waxoyled has to be bone dry as water contains oxygen... and all loose dirt and old waxoyl removed with a pressure washer to stop cracks
Remember this Rusting is a chemical process... remove oxygen from the process, which is what waxoyl does.. and it simply stops. rusty or not.
which requires that the area to be waxoyled has to be bone dry as water contains oxygen... and all loose dirt and old waxoyl removed with a pressure washer to stop cracks
AGG 2.0L 8V. (Golf GTi MkIII)