ally or copper washer

Post by **jake1953** » 08 Sep 2009, 11:35

Does anyone know of the size of the washer on the high oil pressure relief valve screw on a 1.9 watercooled dg engine?
I have an oil leak there and want to buy a new washer in advance so that it's a case of "off and on" rather than removing the old one and trawl the shops.
Thanks

Post by **Aidan** » 08 Sep 2009, 12:32

m10 fine thread so 10mm inner diameter still available from vw for silly money

Post by **jake1953** » 08 Sep 2009, 15:14

Aiden, I've just had a flashback. I put in a secondhand sprin/plunger and washer supplied from elite.
I seem to remember the washer being a fair size-20mm+? it is the relief valve underneath the engine next to the sump plug. It has a large slot in the head of the screw as opposed to a hex head. what do you think?

Post by **Aidan** » 08 Sep 2009, 17:00

sorry my mistake, didn't read the relief bit, just the high pressure so thought it was the sender.
the washer for the big screw is N 013 829 3 23x29mm 83p plus vat from vw

Post by **jake1953** » 08 Sep 2009, 18:17

Bloody hell Aiden. Part numbers as well?
I'll say it again-you're a star
cheers mate

Post by **jake1953** » 12 Sep 2009, 18:50

bought and fitted the washer . Apparently, it's the same washer for the sump plug for the T4 so local VW agent still stock it.

Club 80-90 Forums

ally or copper washer

ally or copper washer

Re: ally or copper washer

Re: ally or copper washer

Re: ally or copper washer

Re: ally or copper washer

Re: ally or copper washer