wiring in a 3way fridge rm212 to my devon sunrise

An alchemy of sparks, copper wire and earth

Moderators: User administrators, Moderators

Locked
stiffler105
Registered user
Posts: 18
Joined: 10 Apr 2009, 05:04

wiring in a 3way fridge rm212 to my devon sunrise

Post by stiffler105 »

hello folks,im a bit stuck at the moment im trying to wire my 3 way fridge into my t25 devon sunrise 84,currently the gas side is connected but iv wired the 3 core cable into the consumer unit -trip switch thing in the cuboard,but when i plug the 240 volt cable into the house socket the fridge doesnt seem to work,also the 12volt connection on top of the fridge has two wires im thinking live neutral any idea which way round they go? any help id be gratefull thanks steve.

User avatar
dugcati
Registered user
Posts: 2004
Joined: 15 Aug 2007, 18:23
80-90 Mem No: 3825
Location: Debris
Contact:

Re: wiring in a 3way fridge rm212 to my devon sunrise

Post by dugcati »

12v shouldn't matter which way round you wire it as it's a 12v heating element... as for the 240v I couldn't say....
It is by will alone that I set my 'van' in motion!

User avatar
1664
Registered user
Posts: 8746
Joined: 30 Mar 2006, 15:20
80-90 Mem No: 3299
Location: Coventry Member

Re: wiring in a 3way fridge rm212 to my devon sunrise

Post by 1664 »

The 240v mains flex from the fridge usually has a 13A plugtop on it and it is plugged into a socket that is wired directly into a circuit breaker in the consumer unit.

The 12v connections are positive and negative; the positive side should go to the switch.
Vorsprung Durch Technik my ar$e!

stiffler105
Registered user
Posts: 18
Joined: 10 Apr 2009, 05:04

Re: wiring in a 3way fridge rm212 to my devon sunrise

Post by stiffler105 »

thanks lads il have a look steve.

taurus
Registered user
Posts: 66
Joined: 11 Jun 2009, 20:24
80-90 Mem No: 7177
Location: Wakefield West Yorkshire

Re: wiring in a 3way fridge rm212 to my devon sunrise

Post by taurus »

hi im taurus... when u plug your fridge into the 240 mains in the house you should get heat coming out of the
top exhaust after a few mins. this is the heating element working ... if this dosent happen then your heater
element on the 240 side is gone.. if youve got an avo then u can go across the heater element and u should get
a resistance , sorry i dont know off hand how many ohms it should be, but if your really stuck i could find out
for u tommorow, i will check mine as i know its ok

Locked