cleaning and greasing t25 wheel bearings ..

Post by **xpress** » 17 Jun 2009, 15:14

anything to know about this before i do it on mine?

are they ok to press out or should i pick up a press/drive tool, anything else to know to make things easier?

cheers!

Post by **jamesc76** » 17 Jun 2009, 15:30

cleaning and greasing ????? if there worn there worn get new ones !

Post by **xpress** » 17 Jun 2009, 15:35

obviously, if there's no rocking on the wheel bearings and just friction grinding road sound then i will grease them. otherwise will replace them with beach balls ..

Post by **R0B** » 17 Jun 2009, 15:38

if you do need new ones.dont get the ones from gsf they are made of chocolate.get the ones from http://www.brickwerks.co.uk/

Post by **Red Westie** » 17 Jun 2009, 15:58

Front taper rollers? 1/2inch paint brush and a small ceramic dish with an inch of petrol in the bottom.
Clean/examine/re-pack with high melting point LM (multi purpose grease) if in any doubt replace them. Remember taper roller bearings are NOT loaded and the outter nut should just touch.
Martin

Post by **xpress** » 17 Jun 2009, 16:30

cheers rob and westie.

Club 80-90 Forums

cleaning and greasing t25 wheel bearings ..

cleaning and greasing t25 wheel bearings ..

Re: cleaning and greasing t25 bearings ..

Re: cleaning and greasing t25 wheel bearings ..

Re: cleaning and greasing t25 wheel bearings ..

Re: cleaning and greasing t25 wheel bearings ..

Re: cleaning and greasing t25 wheel bearings ..