Hi All
I've fitted a replacement engine (1.9dg) to my van which had been standing for a long time. All is now good apart from the waterpump which is leaking from the hole underneath.
My question is will it seal itself up after a while or do I need a new waterpump ( not interested in radweld etc)
If so where is the best place to get one and how much will it cost the cheaper the better for me!
Thanks .
tinman wrote: . . . the cheaper the better for me!
Often not true when it comes to buying parts though.
You need to find out if it's an early or late dg engine that you've got in there (metal thermostat housing on the side of the water pump, or a plastic one that is further back in the engine bay?) and then have a look down at the bottom of this page: Brickwerks parts for petrol cooling system
Tony
Looking for: window apertures for side windows, at the back of the van
T25; 1985; RHD; 1.9DG petrol / LPG; white Autosleeper high-top; Looking rusty again!
tinman wrote: All is now good apart from the waterpump which is leaking from the hole underneath.
My question is will it seal itself up after a while or do I need a new waterpump
It's leaking from the gland and is knackered ... buy a good new one.
Ian.
The Hulley's Bus 1989 2.1DJ Trampspotter LPG courtesy of Steve @ Gasure
