Washer bottle pump and jets replacement

[Fritz]

Washer jets can be un blocked with a fine strand of wire taken from a wire brush and then simply wiggled and pushed till the jet is cleared ,,,,,,

None OEM washer pumps can be quite expensive so try to find a good second hand one...many traders on here should have at least one hanging about....

Regards


Fritz,,,,,,,

[little.legs]

Washer jets I got from JK - thin kthey were £3. GSF do em too. The washer pump i got from gsf (last year) and it fit fine. Straight swap for the original & it was only £8 ish. Good luck.
Jamie

[bmouthboyo]

Straight swap for the washer pump?

I have just recieved mine and the connections are orientated differently and are a larger size.???

Any one know where i can find info on how to make it work with my original connection?

[Ian Hulley]

Straight swap for the washer pump?

I have just recieved mine and the connections are orientated differently and are a larger size.???

Any one know where i can find info on how to make it work with my original connection?

Make a short adaptor loom ... 6mm spades to 3mm spades ... simples !

Ian.

[BigGirther]

I got my t25 after my mate went into the back of my p reg polo. I bought the van with a broken washer pump...out of curiosity, took the one out my wrote off polo, clamped one of the outlets with a cable tie (because on a polo, the pump feeds both the front and back washers) and rigged it up. Fitted in flush. Works fine