just thought I'd share this with you, I've replaced my standard washer jets for a pair of chrome plastic skull twin jets
Not the easiest of jobs to do especially trying to get your hand up behind the dash on the passenger side to hold the screw connector piece in place whilst someone screws the jet into it through the bulkhead. I nearly gave up fitting the passenger side but got there in the end
The eyes on the back of the jet are supposed to light up but I cut the wires off to make fitting easier cause the wire was just getting screwed up whilst the jet was being screwed into the connector.
All that's left to do is paint the bulkhead black where the old jets use to cover
