help fitting a bolt on swivel base plate

Thin bits of metal and bright blue light.

Moderators: User administrators, Moderators

Locked
Ant_3000
Registered user
Posts: 11
Joined: 20 Feb 2009, 16:34
80-90 Mem No: 0
Location: N.London

help fitting a bolt on swivel base plate

Post by Ant_3000 »

I've just bought a bolt on plate for my passenger seat - it was advertised as a 'simple nut and bolt job' on the website that I bought it from but I have a couple of questions.

Hopefully someone has fitted a similar plate in the past and can help me (the place I bought it from is closed to day and I wanted to get the job done this weekend!)

Would I be right assuming that I bolt it on to the existing runners (there are some holes that line up with the holes on the plate?

It comes with 8 bolts but there are only 4 holes - am I supposed to drill 4 more bolt holes. In other words, should these bases be held in place by more than 4 bolts?

Its a sportcraft base.

Many thanks for any help I can get.

Ant

Fritz
Registered user
Posts: 1628
Joined: 17 Jul 2006, 22:51
80-90 Mem No: 380
Location: Ormskirk, Lancashire

Re: help fitting a bolt on swivel base plate

Post by Fritz »

If yours is a 'Bolt on' swivel seat base then do as it says on the tin ,,,,,,,,,,as long as it can be secured at each corner as most of the ones I have ever seen have been welded into place .

Remember the seat height will be raised by around 30mm or more due to the additional plates being added .

Regards


Fritz,,,,,,,,,,,, :ok
One day you will find me,,
Driving in my Camper,
With a Surf and Paisley wrap on both sides....

User avatar
Ian Hulley
Registered user
Posts: 12661
Joined: 11 Oct 2005, 08:08
80-90 Mem No: 1323
Location: Wirksworth, Derbyshire ... or at t'mill

Re: help fitting a bolt on swivel base plate

Post by Ian Hulley »

The swivel should have come with some captive nuts on steel strips ? If these are missing slide M8 nuts inside the rails and use countersunk M8 screws to fasten it through the holes in the rails.

Ian.
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure

Ant_3000
Registered user
Posts: 11
Joined: 20 Feb 2009, 16:34
80-90 Mem No: 0
Location: N.London

Re: help fitting a bolt on swivel base plate

Post by Ant_3000 »

Thanks for the replies -

yep i just drilled a couple of extra holes in the runners and bolted it up.

Phoned the seller and they confirmed this was right.

I can now happily swivel!

fullsunian
Registered user
Posts: 1516
Joined: 01 Jun 2008, 23:46
80-90 Mem No: 5092
Location: Grantham

Re: help fitting a bolt on swivel base plate

Post by fullsunian »

Hi could you tell me where you got it from? and are you happy with it?
Ta :ok
Mmm what's that strange smell from my exhaust...

Ant_3000
Registered user
Posts: 11
Joined: 20 Feb 2009, 16:34
80-90 Mem No: 0
Location: N.London

Re: help fitting a bolt on swivel base plate

Post by Ant_3000 »

sure from here:

http://www.bluebird-type2.co.uk/T25interior.htm" onclick="window.open(this.href);return false;

(scroll down the page)

they have 2 - one you weld in and one that just bolts in - yes its expensive but we only needed one and it would end up costing the same buying 2nd hand and paying for the welding. I' looked for ages for a 2nd hand bolt in one but couldn't find one.

I'm happy with it.

fullsunian
Registered user
Posts: 1516
Joined: 01 Jun 2008, 23:46
80-90 Mem No: 5092
Location: Grantham

Re: help fitting a bolt on swivel base plate

Post by fullsunian »

Hi thanks for that, got a second hand bluebird one off feabay :ok
Mmm what's that strange smell from my exhaust...

Locked