Hi all
My dipped beams decided to stop working last night. The side lights and high beam are fine. The bulbs are fine too as I ran a feed from the switch live directly to the fuse box and they worked so the fault seems to lie somewhere between switch and fusebox I guess.
I'm thinking poss faulty swith.
Anyone else had similar?
Thanks for your help
dip beam not working, any ideas
Moderators: User administrators, Moderators
-
Gunslinger
- Registered user
- Posts: 1426
- Joined: 16 Jul 2007, 14:14
- 80-90 Mem No: 3874
- Location: 3874 Leighton Buzzard
Re: dip beam not working, any ideas
Gunslinger,
You seem to have answered your own question. If you can check the switch terminals with a multimeter.
56 is the live (You already knew that
)
56 b should be live in the dipped position
56 a is main beam.
Mike
You seem to have answered your own question. If you can check the switch terminals with a multimeter.
56 is the live (You already knew that
)56 b should be live in the dipped position
56 a is main beam.
Mike
'Two 'eads is better'n wun even if mine's a sheeps'
Grun
Member Number 1250
D reg 2.1 DJ autosleeper poptop
Grun
Member Number 1250
D reg 2.1 DJ autosleeper poptop
-
Gunslinger
- Registered user
- Posts: 1426
- Joined: 16 Jul 2007, 14:14
- 80-90 Mem No: 3874
- Location: 3874 Leighton Buzzard
Re: dip beam not working, any ideas
Grun wrote:Gunslinger,
You seem to have answered your own question. If you can check the switch terminals with a multimeter.
56 is the live (You already knew that
56 b should be live in the dipped position
56 a is main beam.
Mike
Thanks for the info Mike. I shall check that out later. I thought it was the switch but nice to get confirmation from someone with similar experience.
Stuart