more rust removal

Thin bits of metal and bright blue light.

Moderators: User administrators, Moderators

Locked
User avatar
ricicles
Registered user
Posts: 934
Joined: 16 Mar 2008, 17:47
80-90 Mem No: 6350
Location: wymondham

more rust removal

Post by ricicles »

Image
getting fed up looking at this :?

User avatar
ricicles
Registered user
Posts: 934
Joined: 16 Mar 2008, 17:47
80-90 Mem No: 6350
Location: wymondham

Re: more rust removal

Post by ricicles »

Image
more rust than i expected :cry:

User avatar
ricicles
Registered user
Posts: 934
Joined: 16 Mar 2008, 17:47
80-90 Mem No: 6350
Location: wymondham

Re: more rust removal

Post by ricicles »

Image
:cry: :cry: :cry: :cry: :cry: :cry:

User avatar
ricicles
Registered user
Posts: 934
Joined: 16 Mar 2008, 17:47
80-90 Mem No: 6350
Location: wymondham

Re: more rust removal

Post by ricicles »

Image
lot of new metal to weld in. at this point i decided to try and get it done today so i could paint and seam seal tomorrow, so not any pics as i was on a mission :twisted:

User avatar
ricicles
Registered user
Posts: 934
Joined: 16 Mar 2008, 17:47
80-90 Mem No: 6350
Location: wymondham

Re: more rust removal

Post by ricicles »

Image
very pleased with myself, it was thirsty work so having a cold beer :D

dwayne
Registered user
Posts: 497
Joined: 19 Apr 2008, 13:18
80-90 Mem No: 5649
Location: Writtle Essex

Re: more rust removal

Post by dwayne »

nice work ricicles , did you panel beat that yourself ?

My van seam looked liked that when I got it I did clean it up treat and paint , but it still keeps trying to rear it's ugly head , guess mine may well be like that inside :(
1988 Autohomes Komet 1.9DG
DIKXEY

User avatar
ricicles
Registered user
Posts: 934
Joined: 16 Mar 2008, 17:47
80-90 Mem No: 6350
Location: wymondham

Re: more rust removal

Post by ricicles »

no i am not clever enough to make my own panels, i got it from schofieds an it is terrible. the front part of the arch is so poor i am glad i did not have to use it, the rear part is pretty rough, lots of ripples and dents in it, i had a go at it with hammer and dolly but i think it will need a skim of bondo. on a positive note, the rust is gone :P

User avatar
fry
Registered user
Posts: 23
Joined: 31 Aug 2007, 22:43
80-90 Mem No: 4084
Location: North Devon

Re: more rust removal

Post by fry »

Nice work. Wish I could do such a good job. :ok
Everybody Panic! It's just like Titanic but full of bears!
Club Member No 4084

User avatar
AngeloEvs
Registered user
Posts: 1345
Joined: 22 Nov 2007, 19:22
80-90 Mem No: 4709
Location: Upwell, Norfolk

Re: more rust removal

Post by AngeloEvs »

:ok good un!, looks as though that corrosion started from the rear, had the underseal parted company with the panel ricicles?
1987 DG Karisma LPG with remodelled interior

User avatar
ricicles
Registered user
Posts: 934
Joined: 16 Mar 2008, 17:47
80-90 Mem No: 6350
Location: wymondham

Re: more rust removal

Post by ricicles »

not realy, had to hammer and chislle the sealant off, rust was bad around the seam. also the top corner of the arch. i welded a plate in at the bottom of the door pillar as well, where the arch intrudes into the van if you know what i mean. the mud sat on top of the fuel expansion tanks was horific, i always had my worries about this area so used to hose it down well, but it was still blocked with mud, lukily the seatbelt points look good, cab steps next.
i have often said that ignorance is bliss :mrgreen: i now wonder if it just saves you some time in the short run :ok

User avatar
AngeloEvs
Registered user
Posts: 1345
Joined: 22 Nov 2007, 19:22
80-90 Mem No: 4709
Location: Upwell, Norfolk

Re: more rust removal

Post by AngeloEvs »

ricicles wrote:not realy, had to hammer and chislle the sealant off,


I use cupped wire brush attachments(for angle grinders) to remove underseal and underbody compounds, it will remove it in a jiff and take you down to bare metal. Have to wear a sefety visor as it flies all over the place but fast and effortless!
1987 DG Karisma LPG with remodelled interior

User avatar
ricicles
Registered user
Posts: 934
Joined: 16 Mar 2008, 17:47
80-90 Mem No: 6350
Location: wymondham

Re: more rust removal

Post by ricicles »

yup got one of those, but you cannot get into th the corners with them. going to take the tank off and have alook above it soon. don,t know why but its gonna keep me awake at night if i don,t know :cry:
then i have to do the other side :|

Locked