hook up
Moderators: User administrators, Moderators
-
Ray
- Registered user
- Posts: 250
- Joined: 08 Oct 2005, 11:49
- 80-90 Mem No: 94
- Location: St Albans, Herts: Syncronaut No 27
hook up
Just fitting zig and mains hook up. Want fit mains inlet to engine flap like mockis as I dont want to cut a big hole in my new offside panel. Is there an easy way to route the mains cable from the engine compartment to the inner off side without drilling to many holes?
Ray
2.1dj RHD syncro
2.1dj RHD syncro
-
Titus A Duxass
- Registered user
- Posts: 5777
- Joined: 24 Nov 2007, 08:22
- 80-90 Mem No: 4475
- Location: Cologne
Re: hook up
I drilled one hole when I did this mod.
I fed the cable round the back of the battery and through the bulkhead where the diesel filter is, next to the fuel lines.
I then drilled a hole from inside the RnR box area and fitted a cable lead-through, job done.
I fed the cable round the back of the battery and through the bulkhead where the diesel filter is, next to the fuel lines.
I then drilled a hole from inside the RnR box area and fitted a cable lead-through, job done.
VW T3 GTi Camper 2,0l