At the weekend i lost my indictors! just stopped working (also noticed my light was loose so tighted it possible about the same time stopped working - on holiday near the sea!) anyway got home my mechanic guy has checked the bulbs and any obvoius signs all seem fine checked haynes and fuses seem fine, all dry at back as we can see ( even hair dryed it just in case!) then pulled out flasser unit relay and one bit was burnt out so off to G&s got the bit for £8 popped in back in and,.............. still the same... The indicator glows green when i put it on but no indictors at all? my flashers work and brakes and all other lights apart from aparently i have no reverse lights (not sure if at same time blew or before tho!)
So any idea's to try my mechinic is coming back round 2moro he is trying to get a detailed picture of the fuse box so no's whats what! But any other input or eperince as your good selves are good at is very welcomed!
Mine is a 1981 hightop 2 ltr Aircooled T25 (slowly falling apart!)
New day new problem.!
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 192
- Joined: 02 Sep 2007, 14:59
- 80-90 Mem No: 4134
- Location: crewe membership no 4134
New day new problem.!
Miss Vdubstar .....Duckie the camper.... N hunni the hound....
Re: New day new problem.!
I had a similar problem, I too replaced the relay first, but this didn't solve it, mine turned out to be the hazard warning switch causing the problem. I swapped that for a new one from GSF and all working again. Only thing is that the one I was supplied from GSF didn't fit the aperture in the dash correctly, so I had to cut the apperture to get it to fit, doesn't look the best but it got it through the MOT. Not sure if they just supplied me with the wrong part or if that is the only one they stock, I was in a rush to fit for the MOT on the monday and my local GSF don't open on sunday.
RHD German import 2L CU microbus, slowly becoming a not so rusty camper with a GTI engine
- Gunslinger
- Registered user
- Posts: 1426
- Joined: 16 Jul 2007, 14:14
- 80-90 Mem No: 3874
- Location: 3874 Leighton Buzzard
Re: New day new problem.!
Have you checked the earthing points on the n/s a pillar behind the glove box?
-
- Registered user
- Posts: 192
- Joined: 02 Sep 2007, 14:59
- 80-90 Mem No: 4134
- Location: crewe membership no 4134
Re: New day new problem.!
Nope as not got clue what looking at! will get him check 2moro hope he las bit more clue then! he is not a specfic classic vw man! but a good mechnic x thanks for all your advice.
Miss Vdubstar .....Duckie the camper.... N hunni the hound....
- sezicoolcat
- Registered user
- Posts: 586
- Joined: 24 Apr 2008, 16:42
- 80-90 Mem No: 5198
- Location: Chatham, Kent
- Contact:
Re: New day new problem.!
Check the connector on the gear box for the reverse lights. Thats my bit of input for the day 

If you've gotta go, you've gotta go. (Camping that is
)

-
- Registered user
- Posts: 192
- Joined: 02 Sep 2007, 14:59
- 80-90 Mem No: 4134
- Location: crewe membership no 4134
Re: New day new problem.!
Indictactors fixed would you belive everything ripped out and it was a flipping fuse!as for the reverse lights got check them yet had no one stand be hind me however have had to have 2 fuses replaced so what the betting one of the others was to do with reverse lights! Oh i did have a burnt out flassher unit to so at least thats some more bits replaced!
Miss Vdubstar .....Duckie the camper.... N hunni the hound....