RUST

Thin bits of metal and bright blue light.

Moderators: User administrators, Moderators

User avatar
Pepperami
R.I.P.
Posts: 4655
Joined: 04 Jan 2008, 10:56
80-90 Mem No: 4608
Location: Harleston, Norfolk.

RUST

Post by Pepperami »

Just having a poke around my bus today and discovered this.
Image
Image
Image

That is probably the shallow end, behind the fridge and wardrobe being the deep end!
Should i strip the whole lot out and sort it now? It will take at least a couple of months with a day here and a day there.
fullthrottlejunkies.org

User avatar
jamesc76
Registered user
Posts: 6241
Joined: 14 Oct 2005, 14:42
80-90 Mem No: 1186
Location: Nottingham
Contact:

Re: RUST

Post by jamesc76 »

Gonna have to stop pee'ing the bed buddy!!

Rust proof it vatcan etc and seal it up be ok!
DJ at Dubdayz Summerfest
Now cutting about in an LT35 MWB

User avatar
rainman
Registered user
Posts: 367
Joined: 10 Sep 2007, 20:53
80-90 Mem No: 4142
Location: Gloucestershire

Re: RUST

Post by rainman »

I'm having similar trouble myself, started doing a little bit of cosmetic tidying and have now got the floor out and bits everywhere. It's a bit depressing but at some point I'm going to have to think about what I can realistically achieve without having the van off the road for months. I wish I had a big garage and could do this sort of stuff during the winter instead of in this weather when I want to be driving it. I think that's the decider for me, do I want to be driving it or pulling it apart?
1983 2L a/c CU homebrew (ex-Autohomes Kamper)

User avatar
Pepperami
R.I.P.
Posts: 4655
Joined: 04 Jan 2008, 10:56
80-90 Mem No: 4608
Location: Harleston, Norfolk.

Re: RUST

Post by Pepperami »

jamesc76 wrote:Gonna have to stop pee'ing the bed buddy!!

Rust proof it vatcan etc and seal it up be ok!

As opposed to puking in it :roll: :wink:
fullthrottlejunkies.org

User avatar
Pepperami
R.I.P.
Posts: 4655
Joined: 04 Jan 2008, 10:56
80-90 Mem No: 4608
Location: Harleston, Norfolk.

Re: RUST

Post by Pepperami »

Image
fullthrottlejunkies.org

User avatar
Pepperami
R.I.P.
Posts: 4655
Joined: 04 Jan 2008, 10:56
80-90 Mem No: 4608
Location: Harleston, Norfolk.

Re: RUST

Post by Pepperami »

But on a serious note advice taken on board cheers.
fullthrottlejunkies.org

User avatar
weldore
Registered user
Posts: 5595
Joined: 17 Aug 2008, 22:36
80-90 Mem No: 5833
Location: North Notts

Re: RUST

Post by weldore »

this is all down to crap window seals..the van has proberbly more than enuff protection on the outside originaly but they didnt do such a good job on the inside.your second pic shows where its got in and sat in the void where the panels are joined .get them seals sorted if its still wet in there mate :ok
the word 'pissing' is safe

Dave and gail.....1983 Pop Top 1.9n/a diesel (aka Ready Steady Eddie)

User avatar
ricicles
Registered user
Posts: 934
Joined: 16 Mar 2008, 17:47
80-90 Mem No: 6350
Location: wymondham

Re: RUST

Post by ricicles »

look at the state of your bed clothes you dirty boy :rofl
what do you do with it? is it all deeply pitted? wire brush it and soak it with waxoil or dinitrol if its mainly surface rust, spend ours grit blasting it and por15 then waxoil(thats what i did) grit blaster is here if you need it. :D after you have done what you decide on get those windows sealed and stop the water getting in there. i have loads of sealant for the job here just let me know if you need it. its all do able probably not in a week though.

User avatar
weldore
Registered user
Posts: 5595
Joined: 17 Aug 2008, 22:36
80-90 Mem No: 5833
Location: North Notts

Re: RUST

Post by weldore »

id say...get some rust treatment on it...get them seals sorted and put the cover back on and forget you ever saw it !!!

oh and dont go prodding..it will make a grown man cry !!!!
the word 'pissing' is safe

Dave and gail.....1983 Pop Top 1.9n/a diesel (aka Ready Steady Eddie)

User avatar
ricicles
Registered user
Posts: 934
Joined: 16 Mar 2008, 17:47
80-90 Mem No: 6350
Location: wymondham

Re: RUST

Post by ricicles »

i have got a cutting disc for my sthil chopsaw if you need it. :shock:

User avatar
Pepperami
R.I.P.
Posts: 4655
Joined: 04 Jan 2008, 10:56
80-90 Mem No: 4608
Location: Harleston, Norfolk.

Re: RUST

Post by Pepperami »

Will see how it goes at the weekend when i do the O/S window.
fullthrottlejunkies.org

User avatar
ricicles
Registered user
Posts: 934
Joined: 16 Mar 2008, 17:47
80-90 Mem No: 6350
Location: wymondham

Re: RUST

Post by ricicles »

Image
charlotte!!!
another bit to cut out :(

User avatar
gti mad man
Registered user
Posts: 1020
Joined: 20 Jan 2008, 22:42
80-90 Mem No: 4918
Location: London

Re: RUST

Post by gti mad man »

luckily mine was fien behind there but when the new arch went in it went there the guy had seam selaered it but i waxoyld over the top to be safe
Holdsworth villa 3 1987

Andy

User avatar
ricicles
Registered user
Posts: 934
Joined: 16 Mar 2008, 17:47
80-90 Mem No: 6350
Location: wymondham

Re: RUST

Post by ricicles »

deffo going to cut it out. it will keep me awake otherwise :?

User avatar
Pepperami
R.I.P.
Posts: 4655
Joined: 04 Jan 2008, 10:56
80-90 Mem No: 4608
Location: Harleston, Norfolk.

Re: RUST

Post by Pepperami »

I have had the o/s window out today. Cleaned, cut and welded in new metal. I have been keeping a photo diary on how to do this but wont be able to post until i get home next Thursday. I will continue cleaning up the paint ready for painting and start on the n/s rear window tommorrow.
fullthrottlejunkies.org

Locked