My gear linkage is very loose on my '87 T25. Its a 4 speed box and it goes fin between 1/2 and 3/4 but going from 2/3 or vice versa is a pain in the a***. Anyone have any idea which section of the linkage usually causes this??
Cheers
slack gear linkage problems
Moderators: User administrators, Moderators
-
Ian Hulley
- Registered user
- Posts: 12661
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: slack gear linkage problems
http://www.justkampers.com/shop/type_25 ... rs-linkage
It's normally the plastic bushes (J10900)
that get worn allowing the linkage to become sloppy.
Ian.
It's normally the plastic bushes (J10900)
that get worn allowing the linkage to become sloppy.
Ian.
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure